Fully custom-built top for the discerning boatsman that demands a Top that has nothing to shy away from any new boat OEM boat offering: Fully powder coated CNC mandrel bent 3" x 2" D-pipe main structural columns with plexiglass front and lateral windshields, and an internally cabled electronics box.

This top uses our newly designed handsomely minimalistic (110" long x 72" wide) foam core and hand-laid fiberglass top. The top has embedded LED light ports and comes standard with pre-routed and cable runs for all inside lightning to give your build a seamless OEM look. It comes with sand textured on top and glossy on the sides and bottom. Finished in strong, marine spec, epoxy gel, the assembly is sturdy enough for standing, even at the edges, but still manages to remain so light that it can be picked up by one person unassisted.

It features one center LED port, two rear-facing plus two down-facing LED ports at the helm position. We sell it with an optional LED lights kit from our exclusive marine lighting partner, Lumitec, to complement one of the best-looking and more functional hard tops available for the 30 to 40-foot sport fisherman class.

This T-top's structure is built from a South Florida industry first 3 x 2-inch D-pipe and 2-inch diameter, schedule 80, 6061-T6 aluminum tubing that is 100% CAD designed and CNC mandrel bent, then hand TIG fillet welded to conform to all applicable standards. The finish is a thick 2-step application, high mil, powder coating finish to better complement your boat's looks and offer the utmost in marine environment protection. 

Give us a call today to schedule one of the select few appointments for your T-top installation in our shop in SW Miami, FL, and remember that all of our T-tops are custom made for each customer's specs, so we can't guarantee a fit to any make or model unless we can have the boat in our shop. Typical fabrication/installation takes 6 work weeks or less. Do check our fully featured options menu and keep in mind that if you have a different accessory brand or type preference we can accommodate you, no problem.

Note: All lighting, radio, or radar mount options include internal cable routing.

Fully custom-built top for the discerning boatsman that demands a Top that has nothing to shy away from any new boat OEM boat offering: Fully powder coated CNC mandrel bent 3" x 2" D-pipe main structural columns with plexiglass front and lateral windshields, and an internally cabled electronics box.

This top uses our newly designed handsomely minimalistic (110" long x 72" wide) foam core and hand-laid fiberglass top. The top has embedded LED light ports and comes standard with pre-routed and cable runs for all inside lightning to give your build a seamless OEM look. It comes with sand textured on top and glossy on the sides and bottom. Finished in strong, marine spec, epoxy gel, the assembly is sturdy enough for standing, even at the edges, but still manages to remain so light that it can be picked up by one person unassisted.

It features one center LED port, two rear-facing plus two down-facing LED ports at the helm position. We sell it with an optional LED lights kit from our exclusive marine lighting partner, Lumitec, to complement one of the best-looking and more functional hard tops available for the 30 to 40-foot sport fisherman class.

This T-top's structure is built from a South Florida industry first 3 x 2-inch D-pipe and 2-inch diameter, schedule 80, 6061-T6 aluminum tubing that is 100% CAD designed and CNC mandrel bent, then hand TIG fillet welded to conform to all applicable standards. The finish is a thick 2-step application, high mil, powder coating finish to better complement your boat's looks and offer the utmost in marine environment protection. 

Give us a call today to schedule one of the select few appointments for your T-top installation in our shop in SW Miami, FL, and remember that all of our T-tops are custom made for each customer's specs, so we can't guarantee a fit to any make or model unless we can have the boat in our shop. Typical fabrication/installation takes 6 work weeks or less. Do check our fully featured options menu and keep in mind that if you have a different accessory brand or type preference we can accommodate you, no problem.

Note: All lighting, radio, or radar mount options include internal cable routing.