A matching pair of tall, narrow, black-coated saddle fuel tanks, presented as a port and starboard combo. The tanks are standing upright side-by-side against a checkered background, angled slightly to show they are a mirror-image set. Each tank features an identical arrangement of fittings on its top surface, including a fuel sending unit, several valve fittings, and a white manufacturer's label
A 3D schematic of a starboard-side saddle fuel tank for a 1993 Contender 31, shown against a black background. Text on the image identifies the tank as having an 85-gallon nominal capacity. Dimension lines detail the long, narrow, rectangular tank's measurements as 102 inches long, 16 inches wide, and 16 inches high. The silver-colored schematic displays several fittings on its top surface. The 'WW' anchor logo for Welding World is in the bottom right corner
A pair of tall, narrow, black-coated boat fuel tanks, presented as a port and starboard set. The tanks are standing upright and angled away from each other against a checkered background, emphasizing their height. They are mirror images, each with a textured finish and an identical arrangement of fuel fittings, valves, and a sending unit on their flat top surfacces
A very long and narrow rectangular boat fuel tank with a textured black coating, viewed from a high three-quarter angle that emphasizes its length. The tank is set against a checkered background. Its flat top surface is equipped with several fittings spaced along its length, including a corner brass fitting, a fuel sending unit with a label, an L-shaped valve, and a blue-tipped fitting at the far end
A long, narrow, rectangular boat fuel tank with a textured black finish, seen in a three-quarter profile view against a checkered background. A curved white vent pipe is prominent on the top near corner. At the far end of the tank's flat top surface, an L-shaped valve and a fuel sending unit with a wire are visible
A high-angle, end-on view looking down the entire length of a very long, narrow boat fuel tank, emphasizing its length. The tank has a textured black coating and is set against a checkered background. A series of fittings are aligned down the center of the flat top surface, including a brass corner fitting, a fuel sending unit with a label, an L-shaped valve, and a small blue-tipped fitting at the far end
A close-up view showing a white manufacturer's label positioned above a round, silver fuel sending unit on a heavily textured black surface. The "Welding World, Inc." label identifies the product as a "Contender 31' Saddle Fuel Tank" with an 85-gallon capacity, made on November 1, 2022. Below, the sending unit is recessed into the tank with a black wire emerging from its center. The label also displays ABYC and NMMA compliance logos
A matching pair of tall, narrow, black-coated saddle fuel tanks, presented as a port and starboard combo. The tanks are standing upright side-by-side against a checkered background, angled slightly to show they are a mirror-image set. Each tank features an identical arrangement of fittings on its top surface, including a fuel sending unit, several valve fittings, and a white manufacturer's label
A 3D schematic of a starboard-side saddle fuel tank for a 1993 Contender 31, shown against a black background. Text on the image identifies the tank as having an 85-gallon nominal capacity. Dimension lines detail the long, narrow, rectangular tank's measurements as 102 inches long, 16 inches wide, and 16 inches high. The silver-colored schematic displays several fittings on its top surface. The 'WW' anchor logo for Welding World is in the bottom right corner
A pair of tall, narrow, black-coated boat fuel tanks, presented as a port and starboard set. The tanks are standing upright and angled away from each other against a checkered background, emphasizing their height. They are mirror images, each with a textured finish and an identical arrangement of fuel fittings, valves, and a sending unit on their flat top surfacces
A very long and narrow rectangular boat fuel tank with a textured black coating, viewed from a high three-quarter angle that emphasizes its length. The tank is set against a checkered background. Its flat top surface is equipped with several fittings spaced along its length, including a corner brass fitting, a fuel sending unit with a label, an L-shaped valve, and a blue-tipped fitting at the far end
A long, narrow, rectangular boat fuel tank with a textured black finish, seen in a three-quarter profile view against a checkered background. A curved white vent pipe is prominent on the top near corner. At the far end of the tank's flat top surface, an L-shaped valve and a fuel sending unit with a wire are visible
A high-angle, end-on view looking down the entire length of a very long, narrow boat fuel tank, emphasizing its length. The tank has a textured black coating and is set against a checkered background. A series of fittings are aligned down the center of the flat top surface, including a brass corner fitting, a fuel sending unit with a label, an L-shaped valve, and a small blue-tipped fitting at the far end
A close-up view showing a white manufacturer's label positioned above a round, silver fuel sending unit on a heavily textured black surface. The "Welding World, Inc." label identifies the product as a "Contender 31' Saddle Fuel Tank" with an 85-gallon capacity, made on November 1, 2022. Below, the sending unit is recessed into the tank with a black wire emerging from its center. The label also displays ABYC and NMMA compliance logos
An end-on perspective view of a 3D schematic for a tall, narrow boat fuel tank against a black background. The light-grey, rectangular tank's long, flat top surface is shown with several rendered fittings, including a recessed U-shaped pipe at one end and an L-shaped pipe towards the middle

Contender 31 - 1993 - 85 gal. OEM Replacement Saddle 2-Tank Combo | OEM Replacement

$ 2,700.00
/
  • Local pickup available
  • Over-sized & over-weight item.
  • Only Ships LTL Freight.
  • Call us Mon.-Fri. 8:30 a.m. to 4:40 p.m. if in any doubt.

  • Guaranteed to Fit Your Contender
    Every tank is engineered using OEM drawings and/or reverse-engineered from an original unit to ensure a precise, 100% guaranteed fit.

 

  • Fully Certified Manufacturing
    Our tanks are built by an NMMA-type certified manufacturer and produced in accordance with all ABYC standards.

 

  • USCG Compliant & Pressure Tested
    Each tank meets all USCG requirements and is individually pressure-tested in house. All federal regulations are followed throughout our manufacturing process to ensure maximum safety and reliability.

 

  • .190-Thickness Alcoa® 5052 H32 Aluminum Construction
    Built from premium marine-grade Alcoa® 5052 H32 aluminum at .190 thickness for exceptional strength and long-term durability.

 

  • Complete, Ready-to-Install System
    Each tank comes fully equipped with all required components — including the sender, fittings, and hardware.

 

  • Precision Hand-Welded Construction
    Every tank is hand-crafted using GTAW (TIG) welding, exceeding ASME and AWS D3.7:2004 standards for marine aluminum fabrication.                                                   

 

  • Sherwin-Williams® TarGard® Epoxy Coating
    Finished with Sherwin-Williams® TarGard® Epoxy to provide added protection against corrosion and harsh marine environments, extending the overall life of the tank.

 

  • KUS® (formerly WEMA USA®) Reed-Switch Fuel Level Sender
    Features a high-quality KUS® reed-switch sender with an NBR float, providing accurate and reliable fuel-level measurement.

 

Buy with confidence. Shortly after your payment clears you'll be sent via e-mail a complete set of detailed drawings for you to check all dimensions and fittings positions. If there's any difference from your old tank we can make any reasonable modifications to accommodate your needs. Fabrication of your new tank won't start until you send us your specs confirmation.  

 

IMPORTANT NOTE: The base price is for local pickup in our SW Miami Shop. Check options above for crating and shipping to the contiguous 48 States. All tanks are made to order and the fabrication lead time is 1-2 work weeks. The finished tank pickup window is also 1-2 work weeks, so make sure you will be able to take delivery of your finished tank within that timeframe.     

 

NOTE: Check your tank dimensions thoroughly! Once a tank is manufactured and/or shipped we can't be responsible for mismatches and refunds or returns won't be accepted. All sales are final!

 

Shipping: Only freight to the 48 contiguous states. Contact us for extra-cost shipping options for HI and AK. Orders for international shipping from US-based carriers are welcome but contact us first to coordinate details.

 

Return Policy: No refunds are accepted, as all of our products are made to order. Our policy is strictly limited to the repair or replacement of qualifying defective or damaged goods. Please note that shipping costs are non-refundable. 

 

Fabrication lead time (before shipping): 1-2 work weeks. 

Due to this item's size and weight we can only ship it in an economical way via Less Than Truckload (LTL) consolidated land shipping, and only to the contiguous 48 States.

For shipping inquiries to AK, HI, PR, US-VI, and international shipping, please contact us first at sales@weldingworldinc.com.

All of the destinations above we can only serve as a Free Carrier (or FCA) modality, that requires the customer to contract and pay for their carrier service of choice. We can still ship the item, but only to a warehouse/receiving office within the 48-contiguous States.

In plain terms what this means is that if you want to ship your product to any non-contiguous US territory or internationally, you, the customer, has to provide us with the warehouse address of the carrier that serves your locality with an address within the contiguous 48-US States, as we do not ship overseas on our own.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like

Recently viewed

Back to OEM Replacement Fuel Tanks