Isometric 3D rendering of a 282-gallon Intrepid 327 Open replacement fuel tank featuring a textured coal-tar epoxy finish, triple anti-siphon pickup tubes for multi-engine rigging, and a heavy-duty .250" aluminum hull-fit design.
Dimensional diagram of a 282-gallon Intrepid 327 Open fuel tank showing precise OEM measurements: 86 1/2" length, 39 1/2" width, and 27 7/8" height. Rendered in silver marine-grade aluminum with the Welding World logo on a black background.
Internal cross-section 3D rendering of an Intrepid 327 Open fuel tank, highlighting triple anti-siphon pickup tubes for triple-outboard configurations, internal slosh baffles with drainage holes, and a KUS reed-switch sending unit.
Close-up 3D rendering of the top-mounted rigging on a 282-gallon Intrepid 327 Open fuel tank, featuring triple anti-siphon pickup tubes, a KUS sending unit, and dual fuel fill ports on a textured coal-tar epoxy finish.
Side-profile 3D rendering of a 282-gallon Intrepid 327 Open replacement fuel tank, showcasing the long-form .250" aluminum construction, textured coal-tar epoxy finish, and tapered hull-fit bottom design on a solid black background.
Front-angle 3D rendering of a 282-gallon Intrepid 327 Open replacement fuel tank, showcasing the heavy-duty coal-tar epoxy finish, dual fuel fill ports, and the precision-tapered V-hull design on a solid black background.
Top-down 3D plan view of a 282-gallon Intrepid 327 Open replacement fuel tank, showing the precise layout of the triple anti-siphon pickups, dual fuel fills, and KUS sending unit on a textured coal-tar epoxy surface.
Close-up photograph of the Welding World Inc. manufacturing label for an Intrepid 327 Open fuel tank, confirming a 282-gallon capacity, .250" aluminum thickness, and ABYC/NMMA compliance, positioned next to a KUS fuel sending unit.
Rear-perspective 3D rendering of a 282-gallon Intrepid 327 Open replacement fuel tank, showcasing the tapered hull-fit geometry, heavy-duty coal-tar epoxy finish, and top-mounted rigging hardware on a solid black background.
Underside 3D rendering of a 282-gallon Intrepid 327 Open fuel tank, showing the full-length tapered hull-fit geometry and coal-tar epoxy finish designed for deep-V center console bilge compartments.
Isometric 3D rendering of a 282-gallon Intrepid 327 Open replacement fuel tank featuring a textured coal-tar epoxy finish, triple anti-siphon pickup tubes for multi-engine rigging, and a heavy-duty .250" aluminum hull-fit design.
Dimensional diagram of a 282-gallon Intrepid 327 Open fuel tank showing precise OEM measurements: 86 1/2" length, 39 1/2" width, and 27 7/8" height. Rendered in silver marine-grade aluminum with the Welding World logo on a black background.
Internal cross-section 3D rendering of an Intrepid 327 Open fuel tank, highlighting triple anti-siphon pickup tubes for triple-outboard configurations, internal slosh baffles with drainage holes, and a KUS reed-switch sending unit.
Close-up 3D rendering of the top-mounted rigging on a 282-gallon Intrepid 327 Open fuel tank, featuring triple anti-siphon pickup tubes, a KUS sending unit, and dual fuel fill ports on a textured coal-tar epoxy finish.
Side-profile 3D rendering of a 282-gallon Intrepid 327 Open replacement fuel tank, showcasing the long-form .250" aluminum construction, textured coal-tar epoxy finish, and tapered hull-fit bottom design on a solid black background.
Front-angle 3D rendering of a 282-gallon Intrepid 327 Open replacement fuel tank, showcasing the heavy-duty coal-tar epoxy finish, dual fuel fill ports, and the precision-tapered V-hull design on a solid black background.
Top-down 3D plan view of a 282-gallon Intrepid 327 Open replacement fuel tank, showing the precise layout of the triple anti-siphon pickups, dual fuel fills, and KUS sending unit on a textured coal-tar epoxy surface.
Close-up photograph of the Welding World Inc. manufacturing label for an Intrepid 327 Open fuel tank, confirming a 282-gallon capacity, .250" aluminum thickness, and ABYC/NMMA compliance, positioned next to a KUS fuel sending unit.
Rear-perspective 3D rendering of a 282-gallon Intrepid 327 Open replacement fuel tank, showcasing the tapered hull-fit geometry, heavy-duty coal-tar epoxy finish, and top-mounted rigging hardware on a solid black background.
Underside 3D rendering of a 282-gallon Intrepid 327 Open fuel tank, showing the full-length tapered hull-fit geometry and coal-tar epoxy finish designed for deep-V center console bilge compartments.

Intrepid 327 Open Fuel Tank 282 gal | 2019 OEM Replacement

$ 3,450.00
/
  • Local pickup available
  • Over-sized & over-weight item.
  • Only Ships LTL Freight.
  • Call us Mon.-Fri. 8:30 a.m. to 4:40 p.m. if in any doubt.

Restore the long-range performance of your Intrepid 327 Open with our precision-engineered 282-gallon aluminum fuel tank. Specifically designed to match the high-performance standards of the 327 Open hull, this OEM-replacement unit is built from .250-thickness marine-grade Alcoa® 5052 H32 aluminum—a significant structural upgrade over standard factory tanks. Whether you are running offshore for tournament day or island hopping, this tank provides the structural integrity and reliable fuel delivery required for high-speed center consoles. Every unit is meticulously baffled to minimize fuel surge and TIG-welded to ensure a 100% seamless, drop-in fit for your 2019 model.

 

  • Guaranteed to Fit Your Intrepid
    Every tank is engineered using OEM drawings and/or reverse-engineered from an original unit to ensure a precise, 100% guaranteed fit.  

 

  • Fully Certified Manufacturing
    Our tanks are built by an NMMA-type certified manufacturer and produced in accordance with all ABYC standards.

 

  • USCG Compliant & Pressure Tested
    Each tank meets all USCG requirements and is individually pressure-tested in house. All federal regulations are followed throughout our manufacturing process to ensure maximum safety and reliability.

 

  • .250-Thickness Alcoa® 5052 H32 Aluminum Construction
    Built from premium marine-grade Alcoa® 5052 H32 aluminum at .250 thickness for exceptional strength and long-term durability.

 

  • .190-Thickness Alcoa® 5052 H32 Aluminum Construction
    Built from premium marine-grade Alcoa® 5052 H32 aluminum at .190 thickness for exceptional strength and long-term durability.

 

  • Complete, Ready-to-Install System
    Each tank comes fully equipped with all required components, including the sender, fittings, and hardware.

 

  • Precision Hand-Welded Construction
    Every tank is hand-crafted using GTAW (TIG) welding, exceeding ASME and AWS D3.7:2004 standards for marine aluminum fabrication.

 

  • Sherwin-Williams® TarGard® Epoxy Coating
    Finished with Sherwin-Williams® TarGard® Epoxy to provide added protection against corrosion and harsh marine environments, extending the overall life of the tank.

 

  • KUS® (formerly WEMA USA®) Reed-Switch Fuel Level Sender
    Features a high-quality KUS® reed-switch sender with an NBR float, providing accurate and reliable fuel-level measurement.

 

Buy with confidence. Shortly after your payment clears you’ll be sent via e-mail a complete set of detailed drawings for you to check all dimensions and fittings positions. If there’s any difference from your old tank we can make any reasonable modifications to accommodate your needs. Fabrication of your new tank won’t start until you send us your specs confirmation. 

 

IMPORTANT NOTE: The base price is for local pickup in our SW Miami Shop. Check options above for crating and shipping to the contiguous 48 States. All tanks are made to order and the fabrication lead time is 1-2 work weeks. The finished tank pickup window is also 1-2 work weeks, so make sure you will be able to take delivery of your finished tank within that timeframe.    

 

NOTE: Check your tank dimensions thoroughly! Once a tank is manufactured and/or shipped we can’t be responsible for mismatches and refunds or returns won’t be accepted. All sales are final!

 

Shipping: Only freight to the 48 contiguous states. Contact us for extra-cost shipping options for HI and AK. Orders for international shipping from US-based carriers are welcome but contact us first to coordinate details.

 

Return Policy: No refunds are accepted, as all of our products are made to order. Our policy is strictly limited to the repair or replacement of qualifying defective or damaged goods. Please note that shipping costs are non-refundable.

 

Order Info: This built-to-order tank ships via LTL Freight with a 1-2 week lead time and requires a forklift or loading dock at delivery; it comes equipped with a KUS reed-switch sender and pressure-test certification, so please ensure you verify hull clearance against the listed dimensions before finalizing your order.

Due to this item's size and weight we can only ship it in an economical way via Less Than Truckload (LTL) consolidated land shipping, and only to the contiguous 48 States.

For shipping inquiries to AK, HI, PR, US-VI, and international shipping, please contact us first at sales@weldingworldinc.com.

All of the destinations above we can only serve as a Free Carrier (or FCA) modality, that requires the customer to contract and pay for their carrier service of choice. We can still ship the item, but only to a warehouse/receiving office within the 48-contiguous States.

In plain terms what this means is that if you want to ship your product to any non-contiguous US territory or internationally, you, the customer, has to provide us with the warehouse address of the carrier that serves your locality with an address within the contiguous 48-US States, as we do not ship overseas on our own.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like

Recently viewed

Back to OEM Replacement Fuel Tanks