A boat fuel tank with a smooth black coating and a rounded front end, shown from a high three-quarter angle against a checkered background. The tank's top surface features a fuel sending unit assembly next to a white label, a small vertical metal bracket, and a separate fuel fitting with a yellow cap located toward the rear of the tank
A 3D schematic of a replacement fuel tank for a Mako 18CC 2002, shown against a black background. Text on the diagram identifies it as a 74-gallon net capacity tank. Dimension lines with arrows indicate its measurements as 65 inches long, 25 inches wide, and 11 ½ inches high. The silver, aluminum-finish tank has a rounded front end and features three fittings on its top surface. The Welding World 'WW' anchor logo is in the bottom right corner
A rectangular boat fuel tank with a textured black coating, viewed from a high three-quarter angle against a checkered background. The tank's flat top surface has a fuel sending unit with two fittings and a wire next to a white label at one end. At the opposite end, another fuel fitting is visible with a yellow cap and an attached white tube
A frontal view of a long, rectangular boat fuel tank with a textured black finish, shown against a checkered background. The front bottom edge is cut with two angles to form a shallow V-shape. On the top surface in the foreground, there is a fuel sending unit on a round base, a brass fitting, a small vertical tab, and a white label. At the far end of the tank, a second fuel fitting assembly with a yellow top is visible
A long, rectangular boat fuel tank with a textured black finish, seen in a three-quarter profile view against a checkered background. The flat top surface has two groups of fittings at opposite ends. At the far end, a fuel sending unit assembly with a wire sits next to a white label. In the foreground at the near end, there is a fuel valve with a yellow handle and a separate fitting with a blue cap
A close-up of a white manufacturer's label on a black textured fuel tank. To the left of the label, the silver flange of a fuel sending unit is partially visible. The "Welding World, Inc." label identifies the product as a "Mako 18CC Fuel Tank" and lists specifications including a 74-gallon capacity, an aluminum construction, and a manufacturing date of October 26, 2022. Compliance logos for ABYC and NMMA and a safety warning are at the bottom
A boat fuel tank with a smooth black coating and a rounded front end, shown from a high three-quarter angle against a checkered background. The tank's top surface features a fuel sending unit assembly next to a white label, a small vertical metal bracket, and a separate fuel fitting with a yellow cap located toward the rear of the tank
A 3D schematic of a replacement fuel tank for a Mako 18CC 2002, shown against a black background. Text on the diagram identifies it as a 74-gallon net capacity tank. Dimension lines with arrows indicate its measurements as 65 inches long, 25 inches wide, and 11 ½ inches high. The silver, aluminum-finish tank has a rounded front end and features three fittings on its top surface. The Welding World 'WW' anchor logo is in the bottom right corner
A rectangular boat fuel tank with a textured black coating, viewed from a high three-quarter angle against a checkered background. The tank's flat top surface has a fuel sending unit with two fittings and a wire next to a white label at one end. At the opposite end, another fuel fitting is visible with a yellow cap and an attached white tube
A frontal view of a long, rectangular boat fuel tank with a textured black finish, shown against a checkered background. The front bottom edge is cut with two angles to form a shallow V-shape. On the top surface in the foreground, there is a fuel sending unit on a round base, a brass fitting, a small vertical tab, and a white label. At the far end of the tank, a second fuel fitting assembly with a yellow top is visible
A long, rectangular boat fuel tank with a textured black finish, seen in a three-quarter profile view against a checkered background. The flat top surface has two groups of fittings at opposite ends. At the far end, a fuel sending unit assembly with a wire sits next to a white label. In the foreground at the near end, there is a fuel valve with a yellow handle and a separate fitting with a blue cap
A close-up of a white manufacturer's label on a black textured fuel tank. To the left of the label, the silver flange of a fuel sending unit is partially visible. The "Welding World, Inc." label identifies the product as a "Mako 18CC Fuel Tank" and lists specifications including a 74-gallon capacity, an aluminum construction, and a manufacturing date of October 26, 2022. Compliance logos for ABYC and NMMA and a safety warning are at the bottom
Mako 18CC 2002 with a 74-gallon fuel tank, offering reliable performance and durability for marine adventures

Mako 171 2000 Type-A - Tanque de combustible de repuesto OEM de 37 galones

$ 1,660.00
/
  • Local pickup available
  • Over-sized & over-weight item.
  • Only Ships LTL Freight.
  • Call us Mon.-Fri. 8:30 a.m. to 4:40 p.m. if in any doubt.
  • NOTA IMPORTANTE: El precio base es para retiro local en nuestra SW Miami Shop. Consulte las opciones de embalaje y envío a los 48 estados contiguos. Todos los tanques se fabrican por encargo y el plazo de fabricación es de 2 semanas laborales. La ventana de recolección del tanque terminado también es de 2 semanas laborales, así que asegúrese de poder recibir su tanque terminado dentro de ese plazo.

  • Comprar con confianza. Poco después de que se acredite su pago, se le enviará por correo electrónico un conjunto completo de dibujos para que verifique todas las dimensiones y las posiciones de los accesorios. Si hay alguna diferencia con su antiguo tanque, o si necesita algunas modificaciones menores, podemos hacer los cambios razonables para satisfacer sus necesidades.

    • Construcción de aluminio serie Alcoa ® 5052 H32 de .125 de espesor.

      • Soldado GTAW (TIG) soldado a mano para superar los estándares ASME / ASW D3.7:2004.

        • Sherwin Williams® TarGard® Epoxi pintado para la mejor protección del medio ambiente marino.

          • Interruptor de láminas KUS® (ex-WEMA USA) y transmisor de nivel de combustible de flotador NBR.

            NOTA: ¡Compruebe minuciosamente las dimensiones de su tanque! Una vez que se fabrica y / o envía un tanque, no podemos ser responsables de los desajustes y no se aceptarán reembolsos o devoluciones. ¡Todas las ventas son finales!

            Plazo de ejecución de la fabricación (antes del envío): 2 semanas laborales.

            Envío: Solo flete a los 48 estados contiguos. Contáctenos para conocer las opciones de envío con costo adicional para HI y AK. Se aceptan envíos internacionales de transportistas con sede en EE. UU., pero contáctenos primero para coordinar los detalles.

            Due to this item's size and weight we can only ship it in an economical way via Less Than Truckload (LTL) consolidated land shipping, and only to the contiguous 48 States.

            For shipping inquiries to AK, HI, PR, US-VI, and international shipping, please contact us first at sales@weldingworldinc.com.

            All of the destinations above we can only serve as a Free Carrier (or FCA) modality, that requires the customer to contract and pay for their carrier service of choice. We can still ship the item, but only to a warehouse/receiving office within the 48-contiguous States.

            In plain terms what this means is that if you want to ship your product to any non-contiguous US territory or internationally, you, the customer, has to provide us with the warehouse address of the carrier that serves your locality with an address within the contiguous 48-US States, as we do not ship overseas on our own.

            Este sitio está protegido por hCaptcha y se aplican la Política de privacidad de hCaptcha y los Términos del servicio.

            You may also like

            Visto recientemente

            Volver a productos