A black boat fuel tank with a textured coating and a shallow V-shape cut into its front bottom edge, viewed from a high three-quarter angle against a checkered background. Four L-shaped mounting tabs are welded to the top edges. Various fittings are spaced along the top surface, including a brass fitting at the front corner, a central fuel sending unit with a label, and a fuel fill assembly at the far end
A 3D schematic of the replacement fuel tank for a 1999 Edgewater 18.5 CC, shown against a black background. Text on the image identifies it as a 53-gallon net capacity tank. Dimension lines detail its measurements as 48 ¼ inches long by 25 ¾ inches wide, with a main body height of 12 ¼ inches and a total height of 14 ½ inches at the V-shaped front. The silver-colored schematic displays several fittings on its top surface. The 'WW' anchor logo for Welding World is in the bottom right corner
A rectangular boat fuel tank with a heavy, textured black coating, viewed from a high three-quarter angle against a checkered background. Four L-shaped mounting tabs are welded to the top corners. Various fittings are spaced along the top surface, including a brass fitting in the foreground, a central fuel sending unit with a label, and a fuel fill assembly at the far end
A boat fuel tank with a heavy, textured black coating and angled front bottom corners, viewed from a high, rear three-quarter angle against a checkered background. Four flat mounting tabs are welded to the top edges. A series of fittings are spaced along the top surface, including a brass fitting at the rear, a central fuel sending unit with a label, and a fuel fill assembly with a curved white pipe at the front
A side profile view of a long, rectangular boat fuel tank with a heavy, textured black coating, set against a checkered background. The bottom of the tank has a slight V-shape to match a boat's hull. Four black mounting tabs are attached to the top edge, and various fittings, including a brass fitting, a central fuel sending unit, and a fuel fill assembly with a white pipe, are spaced along the top surface
A close-up view of a manufacturer's label and a round fuel sending unit on a heavily textured black surface. On the left, the white "Welding World, Inc." label specifies the tank is for an "Edgewater 18.5" Center Console" with a 54-gallon capacity, made on September 19, 2022. On the right, the silver fuel sending unit is secured with four screws, with a black wire emerging from its center. The label also features ABYC and NMMA compliance logos
A black boat fuel tank with a textured coating and a shallow V-shape cut into its front bottom edge, viewed from a high three-quarter angle against a checkered background. Four L-shaped mounting tabs are welded to the top edges. Various fittings are spaced along the top surface, including a brass fitting at the front corner, a central fuel sending unit with a label, and a fuel fill assembly at the far end
A 3D schematic of the replacement fuel tank for a 1999 Edgewater 18.5 CC, shown against a black background. Text on the image identifies it as a 53-gallon net capacity tank. Dimension lines detail its measurements as 48 ¼ inches long by 25 ¾ inches wide, with a main body height of 12 ¼ inches and a total height of 14 ½ inches at the V-shaped front. The silver-colored schematic displays several fittings on its top surface. The 'WW' anchor logo for Welding World is in the bottom right corner
A rectangular boat fuel tank with a heavy, textured black coating, viewed from a high three-quarter angle against a checkered background. Four L-shaped mounting tabs are welded to the top corners. Various fittings are spaced along the top surface, including a brass fitting in the foreground, a central fuel sending unit with a label, and a fuel fill assembly at the far end
A boat fuel tank with a heavy, textured black coating and angled front bottom corners, viewed from a high, rear three-quarter angle against a checkered background. Four flat mounting tabs are welded to the top edges. A series of fittings are spaced along the top surface, including a brass fitting at the rear, a central fuel sending unit with a label, and a fuel fill assembly with a curved white pipe at the front
A side profile view of a long, rectangular boat fuel tank with a heavy, textured black coating, set against a checkered background. The bottom of the tank has a slight V-shape to match a boat's hull. Four black mounting tabs are attached to the top edge, and various fittings, including a brass fitting, a central fuel sending unit, and a fuel fill assembly with a white pipe, are spaced along the top surface
A close-up view of a manufacturer's label and a round fuel sending unit on a heavily textured black surface. On the left, the white "Welding World, Inc." label specifies the tank is for an "Edgewater 18.5" Center Console" with a 54-gallon capacity, made on September 19, 2022. On the right, the silver fuel sending unit is secured with four screws, with a black wire emerging from its center. The label also features ABYC and NMMA compliance logos
A symmetrical, frontal view of a 3D schematic for a boat's belly fuel tank, set against a solid black background. The image highlights the tank's V-shaped bottom, designed to fit the deadrise of a hull. A series of fittings are aligned down the center of the wide, flat top surface, with a curved pipe prominent in the foreground

Edgewater 18.5 CC 1999 - 53 gal. net OEM Replacement Fuel Tank

$ 1,200.00
/
Title
  • Local pickup available
  • Over-sized & over-weight item.
  • Only Ships LTL Freight.
  • Call us Mon.-Fri. 8:30 a.m. to 4:40 p.m. if in any doubt.
  • IMPORTANT NOTE: The base price is for local pickup in our SW Miami Shop. Check options for crating and shipping to the contiguous 48 States. All tanks are made to order and the fabrication lead time is 1-2 workweeks. The finished tank pickup window is also 1-2 workweeks, so make sure you can take delivery of your finished tank within that timeframe.


    • Buy with confidence. Shortly after your payment clears you'll be sent via e-mail a complete set of drawings for you to check all dimensions and fittings positions. If there's any difference from your old tank, or you need some minor modifications we can make any reasonable changes to accommodate your needs.


      • .125 thickness Alcoa® 5052 H32 Series aluminum construction.


        • Hand welded GTAW (TIG) welded to exceed ASME / ASW D3.7:2004 standards.


          • Sherwin Williams® TarGard® Epoxy painted for the best marine environment protection.


              • KUSA® (ex-WEMA USA) reed switch and NBR float fuel level sender.


                NOTE: Check your tank dimensions thoroughly! Once a tank is manufactured and/or shipped we can't be responsible for mismatches and refunds or returns won't be accepted. All sales are final!

                Fabrication lead time (before shipping): 1-2 workweeks.

                Shipping: Only freight to the 48 contiguous states. Contact us for extra-cost shipping options for HI and AK. International shipping from US-based carriers is welcome but contact us first to coordinate details.

                Return Policy: No refunds are accepted, as all of our products are made to order. Our policy is strictly limited to the repair or replacement of qualifying defective or damaged goods. Please note that shipping costs are non-refundable. 

                Due to this item's size and weight we can only ship it in an economical way via Less Than Truckload (LTL) consolidated land shipping, and only to the contiguous 48 States.

                For shipping inquiries to AK, HI, PR, US-VI, and international shipping, please contact us first at sales@weldingworldinc.com.

                All of the destinations above we can only serve as a Free Carrier (or FCA) modality, that requires the customer to contract and pay for their carrier service of choice. We can still ship the item, but only to a warehouse/receiving office within the 48-contiguous States.

                In plain terms what this means is that if you want to ship your product to any non-contiguous US territory or internationally, you, the customer, has to provide us with the warehouse address of the carrier that serves your locality with an address within the contiguous 48-US States, as we do not ship overseas on our own.

                This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

                You may also like

                Recently viewed