A perspective high-angle view of a Fiesta Vee Rinker 340 2004 OEM replacement marine fuel tank, showcasing its elongated rectangular design and protective black TarGard epoxy coating. This view highlights the top deck hardware configuration, including the integrated fuel sending unit, brass pickup elbows, fuel fill neck, and vent connections. Precision-engineered from heavy-duty .190" marine-grade aluminum by Welding World, it features a lower mounting flange and is built for a guaranteed 100% drop-in fit.
Dimensional technical diagram for a Fiesta Vee Rinker 340 replacement fuel tank with a 167-gallon capacity. The graphic displays precise measurements of 108" length, 15" width, and 25" height, showing the elongated low-profile shape, bottom-mounted installation flange, brass fittings, and top-mounted fuel system hardware. Fabricated from marine-grade 5052-H32 aluminum, this OEM replacement is engineered by Welding World for a guaranteed 100% drop-in fit.
A front profile view of the Fiesta Vee Rinker 340 replacement fuel tank, highlighting its slim, narrow width profile and a bottom-mounted installation flange. The tank is completely coated in a premium, protective black TarGard epoxy finish for superior resistance against fuel corrosion and the marine environment. Top-mounted hardware is visible stretching down the length of the deck, including precision fittings for the fuel fill and vent lines. Built by Welding World from heavy-duty .190" marine-grade alu
A full side profile elevation view of the Fiesta Vee Rinker 340 replacement marine fuel tank, showcasing its elongated rectangular body coated in a protective black TarGard epoxy finish. The image displays the precision placement of mechanical hardware across the top deck, featuring brass pickups and electrical sending unit connections on the left, an additional brass fitting centered, and fuel fill/vent ports on the right. Fabricated from heavy-duty .190" marine-grade aluminum, this 167-gallon tank is engi
A full top-down overhead view of the Fiesta Vee Rinker 340 replacement marine fuel tank, displaying the complete symmetry of its elongated layout finished in a seamless black TarGard epoxy coating. The top deck clearly shows the hardware configuration: on the left sits the integrated fuel level sending unit with the official ABYC/NMMA manufacturer certification label alongside dual brass pickups and fuel ports; a single brass fitting is centered; and dual fuel line connections are positioned on the far righ
A full side elevation view of the opposite side of the Fiesta Vee Rinker 340 replacement marine fuel tank, showcasing its clean, continuous rectangular profile and protective black TarGard epoxy finish. This perspective highlights the low-profile mounting flanges extending along the bottom edges for secure hull installation. The top deck exhibits the clean alignment of marine-grade hardware, including fuel fill and vent ports on the left, a center brass fitting, and the fuel sending unit assembly on the rig
A close-up rear profile view of the Fiesta Vee Rinker 340 replacement marine fuel tank, emphasizing its tall, slim rectangular profile and a bottom-mounted mounting flange. The entire exterior is coated with a premium black TarGard epoxy finish for elite defense against corrosion in marine environments. This perspective provides a clear view of the top-deck hardware cluster, featuring a fuel fill port, a brass pickup elbow, vent fittings, and a fuel level sending unit. Precision-built by Welding World from
A perspective high-angle view of a Fiesta Vee Rinker 340 2004 OEM replacement marine fuel tank, showcasing its elongated rectangular design and protective black TarGard epoxy coating. This view highlights the top deck hardware configuration, including the integrated fuel sending unit, brass pickup elbows, fuel fill neck, and vent connections. Precision-engineered from heavy-duty .190" marine-grade aluminum by Welding World, it features a lower mounting flange and is built for a guaranteed 100% drop-in fit.
Dimensional technical diagram for a Fiesta Vee Rinker 340 replacement fuel tank with a 167-gallon capacity. The graphic displays precise measurements of 108" length, 15" width, and 25" height, showing the elongated low-profile shape, bottom-mounted installation flange, brass fittings, and top-mounted fuel system hardware. Fabricated from marine-grade 5052-H32 aluminum, this OEM replacement is engineered by Welding World for a guaranteed 100% drop-in fit.
A front profile view of the Fiesta Vee Rinker 340 replacement fuel tank, highlighting its slim, narrow width profile and a bottom-mounted installation flange. The tank is completely coated in a premium, protective black TarGard epoxy finish for superior resistance against fuel corrosion and the marine environment. Top-mounted hardware is visible stretching down the length of the deck, including precision fittings for the fuel fill and vent lines. Built by Welding World from heavy-duty .190" marine-grade alu
A full side profile elevation view of the Fiesta Vee Rinker 340 replacement marine fuel tank, showcasing its elongated rectangular body coated in a protective black TarGard epoxy finish. The image displays the precision placement of mechanical hardware across the top deck, featuring brass pickups and electrical sending unit connections on the left, an additional brass fitting centered, and fuel fill/vent ports on the right. Fabricated from heavy-duty .190" marine-grade aluminum, this 167-gallon tank is engi
A full top-down overhead view of the Fiesta Vee Rinker 340 replacement marine fuel tank, displaying the complete symmetry of its elongated layout finished in a seamless black TarGard epoxy coating. The top deck clearly shows the hardware configuration: on the left sits the integrated fuel level sending unit with the official ABYC/NMMA manufacturer certification label alongside dual brass pickups and fuel ports; a single brass fitting is centered; and dual fuel line connections are positioned on the far righ
A full side elevation view of the opposite side of the Fiesta Vee Rinker 340 replacement marine fuel tank, showcasing its clean, continuous rectangular profile and protective black TarGard epoxy finish. This perspective highlights the low-profile mounting flanges extending along the bottom edges for secure hull installation. The top deck exhibits the clean alignment of marine-grade hardware, including fuel fill and vent ports on the left, a center brass fitting, and the fuel sending unit assembly on the rig
A close-up rear profile view of the Fiesta Vee Rinker 340 replacement marine fuel tank, emphasizing its tall, slim rectangular profile and a bottom-mounted mounting flange. The entire exterior is coated with a premium black TarGard epoxy finish for elite defense against corrosion in marine environments. This perspective provides a clear view of the top-deck hardware cluster, featuring a fuel fill port, a brass pickup elbow, vent fittings, and a fuel level sending unit. Precision-built by Welding World from

Fiesta Vee Rinker 340 Fuel Tank Extended (167 gal) | 2001 OEM Replacement

$ 2,749.00
/
  • Local pickup available
  • Over-sized & over-weight item.
  • Only Ships LTL Freight.
  • Call us Mon.-Fri. 9:00 a.m. to 4:00 p.m. if in any doubt.

Restore your cruiser's fuel system to peak performance with this heavy-duty Fiesta Vee Rinker 340 OEM Replacement Fuel Tank, engineered specifically for 2001 models. Precision-fabricated from high-grade .190-thickness 5052-H32 marine aluminum, this tank delivers exceptional structural integrity and long-term durability against harsh, corrosive marine environments. Built directly from OEM drawings and meticulous reverse-engineered blueprints, it guarantees a 100% precise drop-in fit that requires zero hull modifications. Each unit features expert hand-welded GTAW (TIG) construction and is individually pressure-tested in-house by an NMMA-type certified manufacturer to exceed all ABYC and USCG standards, providing ultimate safety and total peace of mind on the water.

 

 

  • Guaranteed to Fit Your Fiesta Vee Rinker 
    Every tank is engineered using OEM drawings and/or reverse-engineered from an original unit to ensure a precise, 100% guaranteed fit.  

 

  • Fully Certified Manufacturing
    Our tanks are built by an NMMA-type certified manufacturer and produced in accordance with all ABYC standards.

 

  • USCG Compliant & Pressure Tested
    Each tank meets all USCG requirements and is individually pressure-tested in house. All federal regulations are followed throughout our manufacturing process to ensure maximum safety and reliability.

  

  • .190-Thickness 5052 H32 Aluminum Construction
    Built from premium marine-grade 5052 H32 aluminum at .190 thickness for exceptional strength and long-term durability.

 

  • Complete, Ready-to-Install System
    Each tank comes fully equipped with all required components, including the sender, fittings, and hardware.

 

  • Precision Hand-Welded Construction
    Every tank is hand-crafted using GTAW (TIG) welding, exceeding ASME and AWS D3.7:2004 standards for marine aluminum fabrication.                                                   

 

  • Sherwin-Williams® TarGard® Epoxy Coating
    Finished with Sherwin-Williams® TarGard® Epoxy to provide added protection against corrosion and harsh marine environments, extending the overall life of the tank.

 

  • KUS® (formerly WEMA USA®) Reed-Switch Fuel Level Sender
    Features a high-quality KUS® reed-switch sender with an NBR float, providing accurate and reliable fuel-level measurement.

 

Buy with confidence. Shortly after your payment clears you'll be sent via e-mail a complete set of detailed drawings for you to check all dimensions and fittings positions. If there's any difference from your old tank we can make any reasonable modifications to accommodate your needs. Fabrication of your new tank won't start until you send us your specs confirmation.  

 

IMPORTANT NOTE: The base price is for local pickup in our SW Miami Shop. Check options above for crating and shipping to the contiguous 48 States. All tanks are made to order and the fabrication lead time is 1-2 work weeks. The finished tank pickup window is also 1-2 work weeks, so make sure you will be able to take delivery of your finished tank within that timeframe.     

 

NOTE: Check your tank dimensions thoroughly! Once a tank is manufactured and/or shipped we can't be responsible for mismatches and refunds or returns won't be accepted. All sales are final!

 

Shipping: Only freight to the 48 contiguous states. Contact us for extra-cost shipping options for HI and AK. Orders for international shipping from US-based carriers are welcome but contact us first to coordinate details.

 

Return Policy: No refunds are accepted, as all of our products are made to order. Our policy is strictly limited to the repair or replacement of qualifying defective or damaged goods. Please note that shipping costs are non-refundable. 

 

Fabrication lead time (before shipping): 1-2 work weeks. 

Due to this item's size and weight we can only ship it in an economical way via Less Than Truckload (LTL) consolidated land shipping, and only to the contiguous 48 States.

For shipping inquiries to AK, HI, PR, US-VI, and international shipping, please contact us first at sales@weldingworldinc.com.

All of the destinations above we can only serve as a Free Carrier (or FCA) modality, that requires the customer to contract and pay for their carrier service of choice. We can still ship the item, but only to a warehouse/receiving office within the 48-contiguous States.

In plain terms what this means is that if you want to ship your product to any non-contiguous US territory or internationally, you, the customer, has to provide us with the warehouse address of the carrier that serves your locality with an address within the contiguous 48-US States, as we do not ship overseas on our own.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like

Recently viewed