A long, rectangular boat fuel tank with a black coating, viewed from a high, three-quarter profile angle against a checkered background. Multiple L-shaped mounting tabs are welded along the top edges. The top surface features a fuel sending unit with a valve handle and a label at the near end, and a separate, smaller fitting with a yellow cap at the far end
A 3D schematic of the replacement fuel tank for a 1995 Fountain 30, shown against a black background. Text on the image identifies the tank as having a 218-gallon net capacity. Dimension lines detail the long, rectangular tank's measurements as 119 ½ inches long, 37 ¾ inches wide, and 12 ¾ inches high. The silver-colored schematic displays several fittings along its top surface. The 'WW' anchor logo for Welding World is in the bottom right corner
A long, rectangular boat fuel tank with a black coating, featuring a large step-down notch in its side. The tank is viewed from a high, three-quarter profile angle against a checkered background. Multiple L-shaped mounting tabs are welded to the top edges. A small brass fitting with a blue tip is located on the near corner, while a fuel sending unit and a label are visible at the far end
A high-angle view looking down the entire length of a very long, rectangular boat fuel tank with a black, semi-gloss coating. Numerous L-shaped mounting tabs line both top edges of the tank. A single cluster of fittings, including a fuel sending unit and two brass connectors, is located on the top surface at the near end. The tank is set against a checkered background
A high, three-quarter profile view of a very long, rectangular boat fuel tank with a black, semi-gloss coating, set against a checkered background. Numerous L-shaped mounting tabs are welded along the top edges. Two distinct clusters of fittings are located at opposite ends of the top surface: one features a fuel sending unit with a valve, while the other contains two brass fittings and a label
A close-up of a white manufacturer's label on a heavily textured black surface, surrounded by fittings. To the right of the label is a round, silver fuel sending unit, and a brass right-angle fitting is visible above. The "Welding World, Inc." label specifies the tank is for a "Fountain 30' 1995 Fuel Tank" with a 225-gallon capacity, made on September 12, 2022, and features ABYC and NMMA compliance logos
A long, rectangular boat fuel tank with a black coating, viewed from a high, three-quarter profile angle against a checkered background. Multiple L-shaped mounting tabs are welded along the top edges. The top surface features a fuel sending unit with a valve handle and a label at the near end, and a separate, smaller fitting with a yellow cap at the far end
A 3D schematic of the replacement fuel tank for a 1995 Fountain 30, shown against a black background. Text on the image identifies the tank as having a 218-gallon net capacity. Dimension lines detail the long, rectangular tank's measurements as 119 ½ inches long, 37 ¾ inches wide, and 12 ¾ inches high. The silver-colored schematic displays several fittings along its top surface. The 'WW' anchor logo for Welding World is in the bottom right corner
A symmetrical, frontal view of a 3D schematic for a boat's belly fuel tank, set against a solid black background. The light-grey schematic displays a distinct V-shaped bottom designed to fit a hull's deadrise. Numerous L-shaped mounting tabs line the top edges on both sides of the tank. A heavy-duty mounting bracket with a circular hole is centered on the front face, and various fittings are visible on the top surface
A long, rectangular boat fuel tank with a black coating, featuring a large step-down notch in its side. The tank is viewed from a high, three-quarter profile angle against a checkered background. Multiple L-shaped mounting tabs are welded to the top edges. A small brass fitting with a blue tip is located on the near corner, while a fuel sending unit and a label are visible at the far end
A high-angle view looking down the entire length of a very long, rectangular boat fuel tank with a black, semi-gloss coating. Numerous L-shaped mounting tabs line both top edges of the tank. A single cluster of fittings, including a fuel sending unit and two brass connectors, is located on the top surface at the near end. The tank is set against a checkered background
A high, three-quarter profile view of a very long, rectangular boat fuel tank with a black, semi-gloss coating, set against a checkered background. Numerous L-shaped mounting tabs are welded along the top edges. Two distinct clusters of fittings are located at opposite ends of the top surface: one features a fuel sending unit with a valve, while the other contains two brass fittings and a label
A close-up of a white manufacturer's label on a heavily textured black surface, surrounded by fittings. To the right of the label is a round, silver fuel sending unit, and a brass right-angle fitting is visible above. The "Welding World, Inc." label specifies the tank is for a "Fountain 30' 1995 Fuel Tank" with a 225-gallon capacity, made on September 12, 2022, and features ABYC and NMMA compliance logos

Fountain 30 1995 - 218 gal. net OEM Replacement Fuel Tank

$ 3,199.00
/
  • Local pickup available
  • Over-sized & over-weight item.
  • Only Ships LTL Freight.
  • Call us Mon.-Fri. 8:30 a.m. to 4:40 p.m. if in any doubt.

  • IMPORTANT NOTE: The base price is for local pickup in our SW Miami Shop. Check options above for crating and shipping to the contiguous 48 States. All tanks are made to order and the fabrication lead time is 2 work weeks. The finished tank pickup window is also 2 work weeks, so make sure you will be able to take delivery of your finished tank within that timeframe.  

  • Buy with confidence. Shortly after your payment clears you'll be sent via e-mail a complete set of detailed drawings for you to check all dimensions and fittings positions. If there's any difference from your old tank we can make any reasonable modifications to accommodate your needs. Fabrication of your new tank won't start until you send us your specs confirmation.    

  • .190 thickness Alcoa® 5052 H32 Series aluminum construction. 

  • Hand welded GTAW (TIG) welded to exceed ASME / ASW D3.7:2004 standards.

  • Sherwin Williams® TarGard® Epoxy painted for the best marine environment protection. 

  • KUS® (ex-WEMA USA®) reed switch sender with NBR float fuel level.

 NOTE: Check your tank dimensions thoroughly! Once a tank is manufactured and/or shipped we can't be responsible for mismatches and refunds or returns won't be accepted. All sales are final!

Fabrication lead time (before shipping): 2 work weeks. 

Shipping: Only freight to the 48 contiguous states. Contact us for extra-cost shipping options for HI and AK. Orders for international shipping from US-based carriers are welcome but contact us first to coordinate details.



Due to this item's size and weight we can only ship it in an economical way via Less Than Truckload (LTL) consolidated land shipping, and only to the contiguous 48 States.

For shipping inquiries to AK, HI, PR, US-VI, and international shipping, please contact us first at sales@weldingworldinc.com.

All of the destinations above we can only serve as a Free Carrier (or FCA) modality, that requires the customer to contract and pay for their carrier service of choice. We can still ship the item, but only to a warehouse/receiving office within the 48-contiguous States.

In plain terms what this means is that if you want to ship your product to any non-contiguous US territory or internationally, you, the customer, has to provide us with the warehouse address of the carrier that serves your locality with an address within the contiguous 48-US States, as we do not ship overseas on our own.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like

Recently viewed