Dual aluminum fuel tanks designed for the 2001 Grady-White 265 Express, providing a combined 247-gallon capacity with a 119-gallon forward tank and 128-gallon aft tank. Both tanks feature a matte black finish and are equipped with top-mounted hardware including blue-handled shutoff valves, return/vent fittings, and centrally located sender ports. Labeling confirms marine-grade construction, corrosion resistance, and regulatory compliance. This paired layout ensures direct OEM replacement compatibility
128-gallon gross capacity aluminum fuel tank designed for the 2001 Grady-White 265 Express, serving as the forward unit in a tandem combo kit. Dimensions are clearly marked: 66″ in length, 41.5″ in width, and 12″ in height. Flat top surface includes visible fittings positioned for factory-style integration with existing fuel lines and sender hardware. Diagram supports precision cavity matching, system layout planning, and installation documentation
119-gallon gross capacity aluminum fuel tank built for the 2001 Grady-White 265 Express, serving as the aft unit in the tandem OEM replacement combo kit. Tank dimensions are 41″ (L) × 39″ (W) × 18″ (H), shown with top-mounted hardware for fuel delivery, return, and sender integration. Flat surface and marked ports enable straightforward installation, while visual consistency with the forward tank ensures balanced cavity alignment and compliant system upgrade
119-gallon aluminum aft fuel tank designed for the 2001 Grady-White 265 Express, presented with a black matte finish and rectangular geometry. Top-mounted features include a capped blue-handled shutoff valve, a sensor unit with wiring harness, and dual-threaded brass fittings. An affixed compliance label confirms marine-grade 5052-H32 construction, .190″ wall thickness, and regulatory certifications. Layout ensures compatibility with OEM hose routing and electronic monitoring systems
119-gallon aluminum aft fuel tank for the 2001 Grady-White 265 Express OEM replacement kit, featuring a matte black exterior and flat top panel. Topside hardware includes a blue-handled shutoff valve, two rear brass fittings, and a wiring harness looped from an installed level sender. The affixed compliance label at center confirms .190″ 5052-H32 construction, ISO 8846 and ISO 10088 certification, and 9 psi test pressure rating per 33 CFR § 183.510(a)
128-gallon aluminum forward fuel tank for the 2001 Grady-White 265 Express, finished in matte black with a rectangular profile. Top-mounted fittings include a capped blue-handled shutoff valve, brass return fittings, and an electrical sender unit with an attached harness. A central compliance label certifies .190″ 5052-H32 marine-grade aluminum construction and adherence to relevant ISO and CFR standards. Clean hardware arrangement ensures OEM routing compatibility and install-readiness within the vessel
Certification label for the 116-gallon aluminum forward fuel tank installed in the 2001 Grady-White 265 Express OEM replacement kit. Manufactured by Welding World Inc. (Part #WW-T-250, Serial #2022048) using .190″ 5052-H32 marine-grade aluminum. The tank meets ABYC H-24, H-33, and NMMA standards, and is tested under 33 CFR § 183.510(a) with a recommended pressure of 9 psi. Manufacturing date: 01/24/2022. Safety warning highlights the risks of fuel leaks and the need for annual system inspections
Black aluminum fuel tank configured for the 2001 Grady-White 265 Express OEM replacement kit. Top-mounted hardware includes a capped blue-handled shutoff valve at front left, two rear brass return fittings with black bases, and a centrally placed sender unit with an attached wiring harness. A white compliance label near center verifies .190″ 5052-H32 marine-grade construction and 9 psi test certification. Component layout ensures full compatibility with factory fuel routing and electrical integration
Black aluminum fuel tank configured for the 2001 Grady-White 265 Express OEM replacement kit. The top surface features a capped blue-handled shutoff valve, a small cylindrical sender component with a wire harness, and additional threaded brass fittings near a centrally placed compliance label. Matte finish enhances corrosion resistance, while the topside layout supports efficient fuel system integration and electrical connectivity. Tank geometry aligns with OEM cavity fit and routing pathways
Black aluminum fuel tank designed for the 2001 Grady-White 265 Express OEM replacement kit. The topside features a capped blue-handled shutoff valve at the front left, a sensor unit with wiring harness near the center, and dual brass return fittings at the rear. A white compliance label provides certification for .190″ 5052-H32 construction and a 9 psi pressure rating per CFR regulations. Component placement supports straightforward fuel line and electrical integration in alignment with OEM standards
Aluminum fuel tank built for the 2001 Grady-White 265 Express, shown with a black matte finish and rectangular form factor. The topside features include a capped fitting at the front left, a central sender unit with wiring harness, and a dual-port brass fitting at the rear right. A compliance label is mounted near the central hardware, confirming .190″ 5052-H32 aluminum construction and marine fuel system certification. Component arrangement supports factory-standard hose routing, pressure regulation
Aluminum fuel tank designed for the 2001 Grady-White 265 Express, shown with a matte black finish on a transparent background for visual clarity. Top-mounted features include a capped blue-handled shutoff valve near the front left corner and a centrally positioned sensor unit with attached wiring. The flat top geometry and clear component layout support accurate routing, OEM alignment, and installation planning
Matte black aluminum fuel tank configured for the 2001 Grady-White 265 Express OEM replacement kit. Top-mounted features include dual brass return fittings, a central sender unit with wire loop, and a capped valve with blue tip near the front edge. A visible white label marked “FUEL TANK ABYC NMMA” confirms compliance with marine safety and manufacturing standards. Layout supports OEM-aligned hose routing, sensor integration, and system inspection accessibility
Certification label for the 128-gallon aluminum aft fuel tank used in the 2001 Grady-White 265 Express OEM replacement kit. Manufactured by Welding World Inc. (Part #WW-T-250, Serial #2022066), this tank is fabricated from .190″ 5052-H32 marine-grade aluminum and certified for gasoline containment. It meets ISO 8846 and 10088 standards and complies with 33 CFR § 183.510(a), pressure-tested to 9 psi. Label notes build date of 01/28/2022 and highlights safety protocols including annual inspection guidance

Grady-White 265 Express 2001 OEM Replacement Tandem Fuel Tank Combo Kit (119 + 128 gal.)

Regular price$ 3,999.00
/

  • Local pickup available
  • Over-sized & over-weight item.
  • Only Ships LTL Freight.
  • Call us Mon.-Fri. 8:30 a.m. to 4:40 p.m. if in any doubt.
  • IMPORTANT NOTE: The base price is for local pickup in our SW Miami Shop. Check options above for crating and shipping to the contiguous 48 States. All tanks are made to order and the fabrication lead time is 2 work weeks. The finished tank pickup window is also 2 work weeks, so make sure you will be able to take delivery of your finished tank within that timeframe.  

  • Buy with confidence. Shortly after your payment clears you'll be sent via e-mail a complete set of detailed drawings for you to check all dimensions and fittings positions. If there's any difference from your old tank we can make any reasonable modifications to accommodate your needs. Fabrication of your new tank won't start until you send us your specs confirmation.    

  • .190 thickness Alcoa® 5052 H32 Series aluminum construction. 

  • Hand welded GTAW (TIG) welded to exceed ASME / ASW D3.7:2004 standards.

  • Sherwin Williams® TarGard® Epoxy painted for the best marine environment protection. 

  • KUS® (ex-WEMA USA®) reed switch sender with NBR float fuel level.

 NOTE: Check your tank dimensions thoroughly! Once a tank is manufactured and/or shipped we can't be responsible for mismatches and refunds or returns won't be accepted. All sales are final!

Fabrication lead time (before shipping): 2 work weeks

Shipping: Only freight to the 48 contiguous states. Contact us for extra-cost shipping options for HI and AK. Orders for international shipping from US-based carriers are welcome but contact us first to coordinate details.



Due to this item's size and weight we can only ship it in an economical way via Less Than Truckload (LTL) consolidated land shipping, and only to the contiguous 48 States.

For shipping inquiries to AK, HI, PR, US-VI, and international shipping, please contact us first at sales@weldingworldinc.com.

All of the destinations above we can only serve as a Free Carrier (or FCA) modality, that requires the customer to contract and pay for their carrier service of choice. We can still ship the item, but only to a warehouse/receiving office within the 48-contiguous States.

In plain terms what this means is that if you want to ship your product to any non-contiguous US territory or internationally, you, the customer, has to provide us with the warehouse address of the carrier that serves your locality with an address within the contiguous 48-US States, as we do not ship overseas on our own.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Recently viewed