A boat fuel tank with a smooth black coating and a rounded front end, shown from a high three-quarter angle against a checkered background. The tank's top surface features a fuel sending unit assembly next to a white label, a small vertical metal bracket, and a separate fuel fitting with a yellow cap located toward the rear of the tank
A 3D schematic of a replacement fuel tank for a Mako 18CC 2002, shown against a black background. Text on the diagram identifies it as a 74-gallon net capacity tank. Dimension lines with arrows indicate its measurements as 65 inches long, 25 inches wide, and 11 ½ inches high. The silver, aluminum-finish tank has a rounded front end and features three fittings on its top surface. The Welding World 'WW' anchor logo is in the bottom right corner
A rectangular boat fuel tank with a textured black coating, viewed from a high three-quarter angle against a checkered background. The tank's flat top surface has a fuel sending unit with two fittings and a wire next to a white label at one end. At the opposite end, another fuel fitting is visible with a yellow cap and an attached white tube
A frontal view of a long, rectangular boat fuel tank with a textured black finish, shown against a checkered background. The front bottom edge is cut with two angles to form a shallow V-shape. On the top surface in the foreground, there is a fuel sending unit on a round base, a brass fitting, a small vertical tab, and a white label. At the far end of the tank, a second fuel fitting assembly with a yellow top is visible
A long, rectangular boat fuel tank with a textured black finish, seen in a three-quarter profile view against a checkered background. The flat top surface has two groups of fittings at opposite ends. At the far end, a fuel sending unit assembly with a wire sits next to a white label. In the foreground at the near end, there is a fuel valve with a yellow handle and a separate fitting with a blue cap
A close-up of a white manufacturer's label on a black textured fuel tank. To the left of the label, the silver flange of a fuel sending unit is partially visible. The "Welding World, Inc." label identifies the product as a "Mako 18CC Fuel Tank" and lists specifications including a 74-gallon capacity, an aluminum construction, and a manufacturing date of October 26, 2022. Compliance logos for ABYC and NMMA and a safety warning are at the bottom

Mako 18CC 2002 - 74 gallon OEM Replacement Fuel Tank

Regular price$ 1,660.00
/

  • Local pickup available
  • Over-sized & over-weight item.
  • Only Ships LTL Freight.
  • Call us Mon.-Fri. 8:30 a.m. to 4:40 p.m. if in any doubt.
  • IMPORTANT NOTE: The base price is for local pickup in our SW Miami Shop. Check options above for crating and shipping to the contiguous 48 States. All tanks are made to order and the fabrication lead time is 2 work weeks. The finished tank pickup window is also 2 work weeks, so make sure you will be able to take delivery of your finished tank within that timeframe.  

  • Buy with confidence. Shortly after your payment clears you'll be sent via e-mail a complete set of detailed drawings for you to check all dimensions and fittings positions. If there's any difference from your old tank we can make any reasonable modifications to accommodate your needs. Fabrication of your new tank won't start until you send us your specs confirmation.    

  • .190 thickness Alcoa® 5052 H32 Series aluminum construction. 

  • Hand welded GTAW (TIG) welded to exceed ASME / ASW D3.7:2004 standards.

  • Sherwin Williams® TarGard® Epoxy painted for the best marine environment protection. 

  • KUS® (ex-WEMA USA®) reed switch sender with NBR float fuel level.

 NOTE: Check your tank dimensions thoroughly! Once a tank is manufactured and/or shipped we can't be responsible for mismatches and refunds or returns won't be accepted. All sales are final!

Fabrication lead time (before shipping): 2 work weeks

Shipping: Only freight to the 48 contiguous states. Contact us for extra-cost shipping options for HI and AK. Orders for international shipping from US-based carriers are welcome but contact us first to coordinate details.



Due to this item's size and weight we can only ship it in an economical way via Less Than Truckload (LTL) consolidated land shipping, and only to the contiguous 48 States.

For shipping inquiries to AK, HI, PR, US-VI, and international shipping, please contact us first at sales@weldingworldinc.com.

All of the destinations above we can only serve as a Free Carrier (or FCA) modality, that requires the customer to contract and pay for their carrier service of choice. We can still ship the item, but only to a warehouse/receiving office within the 48-contiguous States.

In plain terms what this means is that if you want to ship your product to any non-contiguous US territory or internationally, you, the customer, has to provide us with the warehouse address of the carrier that serves your locality with an address within the contiguous 48-US States, as we do not ship overseas on our own.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Recently viewed