A black rectangular marine fuel tank with a matte finish is displayed from a diagonal top angle against a black background. The tank features mounting tabs along its edges and top. There are several metallic fittings on the top surface, including two brass connectors near one end and a bent silver pipe near the middle. The front edge is slightly beveled
A white rectangular marine fuel tank is shown at an angled top view on a black background. The tank is labeled “Pursuit 24.7 Fuel Tank” with a capacity of 144 gallons net. Dimensions are marked with white arrows and text: 92 inches length, 26 inches width, and 15 inches height. Several small fittings and mounting tabs are visible on the top surface. The Welding World logo appears in the bottom right corner
A black rectangular marine fuel tank shown from an angled top view on a black background. The tank has a flat top surface with several small metal fittings and mounting tabs positioned near one end and one tab near the opposite end. The tank’s edges are slightly beveled with smooth surfaces and clean corners. The background is solid black, highlighting the shape and details of the tank
A long rectangular black marine fuel tank shown in a three-quarter angled top view on a black background. The tank features a flat top surface with several small metal fittings near one end and one mounting tab near the opposite end. The edges of the tank are straight and clean, with a slightly beveled corner on the side closest to the viewer. The black background contrasts sharply with the tank, emphasizing its shape and the reflective metallic details on top
A rectangular marine fuel tank is shown from a three-quarter angled top view against a black background. The tank is black with a smooth matte finish and has straight, clean edges. On the top surface, there are several small metallic fittings and connectors clustered near one end, including a small circular plate with attached wiring and a bent metal tube. At the opposite end, two small brass fittings protrude near the edge. A single mounting tab extends upward near the far corner
Pursuit 24.7 (144 gal. net) - Fuel Tank | OEM Replacement
A black marine fuel tank viewed from below at a slight angle, set against a black background. The tank has a smooth, matte finish and a rectangular shape with straight edges and a beveled corner on the far side. The underside of the tank is visible, showing a deep recessed area with clean, sharp lines. The tank’s design appears sturdy and functional, with no visible fittings or attachments in this view
A black rectangular marine fuel tank with a matte finish is displayed from a diagonal top angle against a black background. The tank features mounting tabs along its edges and top. There are several metallic fittings on the top surface, including two brass connectors near one end and a bent silver pipe near the middle. The front edge is slightly beveled
A white rectangular marine fuel tank is shown at an angled top view on a black background. The tank is labeled “Pursuit 24.7 Fuel Tank” with a capacity of 144 gallons net. Dimensions are marked with white arrows and text: 92 inches length, 26 inches width, and 15 inches height. Several small fittings and mounting tabs are visible on the top surface. The Welding World logo appears in the bottom right corner
A black rectangular marine fuel tank shown from an angled top view on a black background. The tank has a flat top surface with several small metal fittings and mounting tabs positioned near one end and one tab near the opposite end. The tank’s edges are slightly beveled with smooth surfaces and clean corners. The background is solid black, highlighting the shape and details of the tank
A long rectangular black marine fuel tank shown in a three-quarter angled top view on a black background. The tank features a flat top surface with several small metal fittings near one end and one mounting tab near the opposite end. The edges of the tank are straight and clean, with a slightly beveled corner on the side closest to the viewer. The black background contrasts sharply with the tank, emphasizing its shape and the reflective metallic details on top
A rectangular marine fuel tank is shown from a three-quarter angled top view against a black background. The tank is black with a smooth matte finish and has straight, clean edges. On the top surface, there are several small metallic fittings and connectors clustered near one end, including a small circular plate with attached wiring and a bent metal tube. At the opposite end, two small brass fittings protrude near the edge. A single mounting tab extends upward near the far corner
Pursuit 24.7 (144 gal. net) - Fuel Tank | OEM Replacement
A black marine fuel tank viewed from below at a slight angle, set against a black background. The tank has a smooth, matte finish and a rectangular shape with straight edges and a beveled corner on the far side. The underside of the tank is visible, showing a deep recessed area with clean, sharp lines. The tank’s design appears sturdy and functional, with no visible fittings or attachments in this view

Pursuit 24.7 (144 gal. net) - Fuel Tank | OEM Replacement

$ 2,100.00
/
  • Local pickup available
  • Over-sized & over-weight item.
  • Only Ships LTL Freight.
  • Call us Mon.-Fri. 8:30 a.m. to 4:40 p.m. if in any doubt.

  • Guaranteed to Fit Your Pursuit
    Every tank is engineered using OEM drawings and/or reverse-engineered from an original unit to ensure a precise, 100% guaranteed fit.

 

  • Fully Certified Manufacturing
    Our tanks are built by an NMMA-type certified manufacturer and produced in accordance with all ABYC standards.

 

  • USCG Compliant & Pressure Tested
    Each tank meets all USCG requirements and is individually pressure-tested in house. All federal regulations are followed throughout our manufacturing process to ensure maximum safety and reliability.

 

  • .190-Thickness Alcoa® 5052 H32 Aluminum Construction
    Built from premium marine-grade Alcoa® 5052 H32 aluminum at .190 thickness for exceptional strength and long-term durability.

 

  • Complete, Ready-to-Install System
    Each tank comes fully equipped with all required components — including the sender, fittings, and hardware.

 

  • Precision Hand-Welded Construction
    Every tank is hand-crafted using GTAW (TIG) welding, exceeding ASME and AWS D3.7:2004 standards for marine aluminum fabrication.                                                   

 

  • Sherwin-Williams® TarGard® Epoxy Coating
    Finished with Sherwin-Williams® TarGard® Epoxy to provide added protection against corrosion and harsh marine environments, extending the overall life of the tank.

 

  • KUS® (formerly WEMA USA®) Reed-Switch Fuel Level Sender
    Features a high-quality KUS® reed-switch sender with an NBR float, providing accurate and reliable fuel-level measurement.

 

Buy with confidence. Shortly after your payment clears you'll be sent via e-mail a complete set of detailed drawings for you to check all dimensions and fittings positions. If there's any difference from your old tank we can make any reasonable modifications to accommodate your needs. Fabrication of your new tank won't start until you send us your specs confirmation.  

 

IMPORTANT NOTE: The base price is for local pickup in our SW Miami Shop. Check options above for crating and shipping to the contiguous 48 States. All tanks are made to order and the fabrication lead time is 1-2 work weeks. The finished tank pickup window is also 1-2 work weeks, so make sure you will be able to take delivery of your finished tank within that timeframe.     

 

NOTE: Check your tank dimensions thoroughly! Once a tank is manufactured and/or shipped we can't be responsible for mismatches and refunds or returns won't be accepted. All sales are final!

 

Shipping: Only freight to the 48 contiguous states. Contact us for extra-cost shipping options for HI and AK. Orders for international shipping from US-based carriers are welcome but contact us first to coordinate details.

 

Return Policy: No refunds are accepted, as all of our products are made to order. Our policy is strictly limited to the repair or replacement of qualifying defective or damaged goods. Please note that shipping costs are non-refundable. 

 

Fabrication lead time (before shipping): 1-2 work weeks. 

Due to this item's size and weight we can only ship it in an economical way via Less Than Truckload (LTL) consolidated land shipping, and only to the contiguous 48 States.

For shipping inquiries to AK, HI, PR, US-VI, and international shipping, please contact us first at sales@weldingworldinc.com.

All of the destinations above we can only serve as a Free Carrier (or FCA) modality, that requires the customer to contract and pay for their carrier service of choice. We can still ship the item, but only to a warehouse/receiving office within the 48-contiguous States.

In plain terms what this means is that if you want to ship your product to any non-contiguous US territory or internationally, you, the customer, has to provide us with the warehouse address of the carrier that serves your locality with an address within the contiguous 48-US States, as we do not ship overseas on our own.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like

Recently viewed