A black-coated boat fuel tank with a wide, rounded front end, viewed from a high three-quarter angle against a checkered background. The belly-style tank features four black mounting tabs welded along its top edges. A fuel valve assembly and a white label are visible on the top surface near the front
A 3D schematic of the replacement fuel tank for a 2003 Hydra-Sports Bay 24, shown against a black background. Text on the image indicates a 69-gallon nominal capacity. Dimension lines show the tank is 63 inches long and 29 inches wide, with the rounded front section being 12 ¾ inches high and the rear rectangular section being 7 ½ inches high. The silver-colored schematic features four mounting tabs and a fuel valve assembly. The 'WW' anchor logo for Welding World is in the bottom right
A black-coated boat fuel tank with a rounded front bottom edge, viewed from a high three-quarter angle against a checkered background. The tank features four distinctive C-channel style mounting brackets welded to its top edges. On the top surface near the rear, a fuel sending unit assembly with a white electrical connector and a label are visible
A black-coated boat fuel tank with a rounded front bottom edge, viewed from a high, rear three-quarter angle against a checkered background. The tank features four black mounting brackets welded along its top edges. A fuel sending unit and valve assembly is visible on the top surface at the far end of the tank
A close-up, high-angle view of a corner on a black, textured boat fuel tank, set against a checkered background. The tank's front bottom edge is cut into a shallow V-shape. The top surface features a cluster of fittings, including a main valve body, an electrical connector with a blue lever, a small brass fitting, and a vertical tab. Two mounting brackets are visible on the top edge
A close-up of a white manufacturer's label on a heavily textured black fuel tank. A metal tube with a blue cap is visible above the label, and a round, silver fuel sending unit is partially seen to the right. The "Welding World, Inc." label identifies the tank is for a "Hydra Sport Bay 24'" with a 69-gallon capacity, made on September 19, 2022. The label also features ABYC and NMMA compliance logos and a safety warning
A black-coated boat fuel tank with a wide, rounded front end, viewed from a high three-quarter angle against a checkered background. The belly-style tank features four black mounting tabs welded along its top edges. A fuel valve assembly and a white label are visible on the top surface near the front
A 3D schematic of the replacement fuel tank for a 2003 Hydra-Sports Bay 24, shown against a black background. Text on the image indicates a 69-gallon nominal capacity. Dimension lines show the tank is 63 inches long and 29 inches wide, with the rounded front section being 12 ¾ inches high and the rear rectangular section being 7 ½ inches high. The silver-colored schematic features four mounting tabs and a fuel valve assembly. The 'WW' anchor logo for Welding World is in the bottom right
A black-coated boat fuel tank with a rounded front bottom edge, viewed from a high three-quarter angle against a checkered background. The tank features four distinctive C-channel style mounting brackets welded to its top edges. On the top surface near the rear, a fuel sending unit assembly with a white electrical connector and a label are visible
A black-coated boat fuel tank with a rounded front bottom edge, viewed from a high, rear three-quarter angle against a checkered background. The tank features four black mounting brackets welded along its top edges. A fuel sending unit and valve assembly is visible on the top surface at the far end of the tank
A close-up, high-angle view of a corner on a black, textured boat fuel tank, set against a checkered background. The tank's front bottom edge is cut into a shallow V-shape. The top surface features a cluster of fittings, including a main valve body, an electrical connector with a blue lever, a small brass fitting, and a vertical tab. Two mounting brackets are visible on the top edge
A close-up of a white manufacturer's label on a heavily textured black fuel tank. A metal tube with a blue cap is visible above the label, and a round, silver fuel sending unit is partially seen to the right. The "Welding World, Inc." label identifies the tank is for a "Hydra Sport Bay 24'" with a 69-gallon capacity, made on September 19, 2022. The label also features ABYC and NMMA compliance logos and a safety warning
A frontal view of a 3D schematic for a boat's belly fuel tank, shown against a solid black background. The image highlights the tank's wide, curved front face, the bottom of which is cut into a shallow V-shape. The light-grey schematic shows four angled mounting tabs on its top corners and a fuel valve assembly on its top surface

Hydra-Sports Bay 24 2003 - 69 gal. OEM Replacement Belly Fuel Tank

$ 1,200.00
/
  • Local pickup available
  • Over-sized & over-weight item.
  • Only Ships LTL Freight.
  • Call us Mon.-Fri. 8:30 a.m. to 4:40 p.m. if in any doubt.

  • IMPORTANT NOTE: The base price is for local pickup in our SW Miami Shop. Check options above for crating and shipping to the contiguous 48 States. All tanks are made to order and the fabrication lead time is 1-2 work weeks. The finished tank pickup window is also 1-2 work weeks, so make sure you will be able to take delivery of your finished tank within that timeframe.  

  • Buy with confidence. Shortly after your payment clears you'll be sent via e-mail a complete set of detailed drawings for you to check all dimensions and fittings positions. If there's any difference from your old tank we can make any reasonable modifications to accommodate your needs. Fabrication of your new tank won't start until you send us your specs confirmation.    

  • .125 thickness Alcoa® 5052 H32 Series aluminum construction. 

  • Hand welded GTAW (TIG) welded to exceed ASME / ASW D3.7:2004 standards.

  • Sherwin Williams® TarGard® Epoxy painted for the best marine environment protection. 

  • KUS® (ex-WEMA USA®) reed switch sender with NBR float fuel level.

 NOTE: Check your tank dimensions thoroughly! Once a tank is manufactured and/or shipped we can't be responsible for mismatches and refunds or returns won't be accepted. All sales are final!

Fabrication lead time (before shipping): 1-2 work weeks. 

Shipping: Only freight to the 48 contiguous states. Contact us for extra-cost shipping options for HI and AK. Orders for international shipping from US-based carriers are welcome but contact us first to coordinate details.

Return Policy: No refunds are accepted, as all of our products are made to order. Our policy is strictly limited to the repair or replacement of qualifying defective or damaged goods. Please note that shipping costs are non-refundable. 

Due to this item's size and weight we can only ship it in an economical way via Less Than Truckload (LTL) consolidated land shipping, and only to the contiguous 48 States.

For shipping inquiries to AK, HI, PR, US-VI, and international shipping, please contact us first at sales@weldingworldinc.com.

All of the destinations above we can only serve as a Free Carrier (or FCA) modality, that requires the customer to contract and pay for their carrier service of choice. We can still ship the item, but only to a warehouse/receiving office within the 48-contiguous States.

In plain terms what this means is that if you want to ship your product to any non-contiguous US territory or internationally, you, the customer, has to provide us with the warehouse address of the carrier that serves your locality with an address within the contiguous 48-US States, as we do not ship overseas on our own.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like

Recently viewed