A black, rectangular 200-gallon OEM replacement fuel tank for a Stamas Liberty 288 Walkaround 1992 boat. The tank has various fittings and connections on its top surface, and a small bracket is visible on its side
A diagram of a silver, rectangular fuel tank for a Stamas Liberty 288 1992, showing its dimensions: 54 inches in length, 44 inches in width, and 20 inches in height, with a nominal capacity of 200 gallons. Various fittings are visible on the top surface of the tank
A black, rectangular fuel tank with a textured surface, featuring various fittings on its top, including what appears to be a hose connection, and two flat mounting brackets on opposite edges of the top surface. The bottom corners of the tank are slightly beveled
A black, rectangular fuel tank with a textured surface, featuring various metallic fittings and a small hose connection on its top. Two flat mounting brackets are visible on the top edge, and a horizontal, raised strip is present along the bottom front of the tank
A black, rectangular fuel tank with a slightly textured surface, featuring various metallic fittings and a small hose on its top. Two flat, black mounting brackets are visible on the top edge, and a horizontal, raised bracket runs along the lower front of the tank
A close-up view of the top of a black, textured fuel tank, showing various metallic and plastic fittings, including an L-shaped hose connector, a fuel gauge with wiring, and two smaller brass-colored fittings. A white product label from "Welding World Inc." is partially visible in the background
A close-up of a product label for a Welding World Inc. WW-T-250 fuel tank, customer QB1756. It was manufactured on July 15, 2021, for a Stamas 288 WA, with a capacity of 200 gallons. The tank is made from 0.190-inch thick Aluminum 5052-H-32, has serial number 202141, and is recommended for gasoline. It lists a maximum test pressure of 9 psi / 34.5 kpa and states it meets 33 CFR § 183.510 (a), ISO 8846 and 10088 specifications. The label also shows memberships with ABYC and NMMA,

Stamas Liberty 288 Walkaround 1992 OEM Replacement Tank - 200 gal.

Regular price$ 2,400.00
/

  • Local pickup available
  • Over-sized & over-weight item.
  • Only Ships LTL Freight.
  • Call us Mon.-Fri. 8:30 a.m. to 4:40 p.m. if in any doubt.
  • IMPORTANT NOTE: The base price is for local pickup in our SW Miami Shop. Check options above for crating and shipping to the contiguous 48 States. All tanks are made to order and the fabrication lead time is 2 work weeks. The finished tank pickup window is also 2 work weeks, so make sure you will be able to take delivery of your finished tank within that timeframe.  

  • Buy with confidence. Shortly after your payment clears you'll be sent via e-mail a complete set of detailed drawings for you to check all dimensions and fittings positions. If there's any difference from your old tank we can make any reasonable modifications to accommodate your needs. Fabrication of your new tank won't start until you send us your specs confirmation.    

  • .190 thickness Alcoa® 5052 H32 Series aluminum construction. 

  • Hand welded GTAW (TIG) welded to exceed ASME / ASW D3.7:2004 standards.

  • Sherwin Williams® TarGard® Epoxy painted for the best marine environment protection. 

  • KUS® (ex-WEMA USA®) reed switch sender with NBR float fuel level.

 NOTE: Check your tank dimensions thoroughly! Once a tank is manufactured and/or shipped we can't be responsible for mismatches and refunds or returns won't be accepted. All sales are final!

Fabrication lead time (before shipping): 2 work weeks

Shipping: Only freight to the 48 contiguous states. Contact us for extra-cost shipping options for HI and AK. Orders for international shipping from US-based carriers are welcome but contact us first to coordinate details.



Due to this item's size and weight we can only ship it in an economical way via Less Than Truckload (LTL) consolidated land shipping, and only to the contiguous 48 States.

For shipping inquiries to AK, HI, PR, US-VI, and international shipping, please contact us first at sales@weldingworldinc.com.

All of the destinations above we can only serve as a Free Carrier (or FCA) modality, that requires the customer to contract and pay for their carrier service of choice. We can still ship the item, but only to a warehouse/receiving office within the 48-contiguous States.

In plain terms what this means is that if you want to ship your product to any non-contiguous US territory or internationally, you, the customer, has to provide us with the warehouse address of the carrier that serves your locality with an address within the contiguous 48-US States, as we do not ship overseas on our own.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Recently viewed