Detailed close-up 3D rendering of the fuel fill and vent assembly for a Yellowfin 54 replacement fuel tank kit, showcasing the precision-machined fittings and heavy-duty coal-tar epoxy coating.
YellowFin 54 Fuel Tank (3-tank combo) | OEM Replacement
YellowFin 54 Fuel Tank (3-tank combo) | OEM Replacement
YellowFin 54 Fuel Tank (3-tank combo) | OEM Replacement
Rear-perspective 3D rendering of the complete 3-piece fuel tank replacement kit for a Yellowfin 54, showcasing the center tank and two saddle tanks with a protective coal-tar epoxy finish.
Detail 3D rendering of the starboard saddle fuel tank for a Yellowfin 54, highlighting the unpainted mill-finish aluminum surface, fuel pickup ports, and inspection plate locations.
Detail rendering of the Yellowfin 54 fuel tank 3-tank combo OEM replacement kit, showcasing weld quality, hardware placement, and the corrosion-resistant coal-tar epoxy finish across all three tanks.
Alternative overhead 3D rendering of the Yellowfin 54 fuel tank 3-tank combo kit, displaying the center and saddle tank arrangement with precision rigging hardware and corrosion-resistant coating.
Dimensional diagram for the center fuel tank of a Yellowfin 54 OEM replacement 3-tank combo, showing primary measurements rendered in mill-finish aluminum with the Welding World logo.
Dimensional diagram for the PORT saddle fuel tank of a Yellowfin 54 OEM replacement 3-tank combo, featuring precise measurements with a tapered wedge-hull profile rendered in mill-finish aluminum.
Dimensional diagram for the starboard (STBD) saddle fuel tank of a Yellowfin 54 OEM replacement 3-tank combo, showing engineering measurements with a tapered wedge profile rendered in mill-finish aluminum.
Dimensional diagram for the PORT saddle fuel tank of a Yellowfin 54 OEM replacement 3-tank combo, featuring precise measurements with a tapered wedge-hull profile rendered in mill-finish aluminum.
Dimensional diagram for the starboard (STBD) saddle fuel tank of a Yellowfin 54 OEM replacement 3-tank combo, showing engineering measurements with a tapered wedge profile rendered in mill-finish aluminum.
Detailed close-up 3D rendering of the rigging hardware on a Yellowfin 54 3-piece fuel tank kit, featuring premium fuel pickups, sending units, and inspection plates on coal-tar epoxy finished center and saddle tanks.
Detailed close-up 3D rendering of the fuel fill and vent assembly for a Yellowfin 54 replacement fuel tank kit, showcasing the precision-machined fittings and heavy-duty coal-tar epoxy coating.
High-angle 3D rendering of the 3-piece OEM replacement fuel tank kit for a Yellowfin 54, featuring the center tank and two saddle tanks with pre-installed rigging hardware and a coal-tar epoxy finish.
Low-angle wide-perspective 3D rendering of the center tank and twin saddle tanks for a Yellowfin 54, showcasing the hull-matching tapered profiles and coal-tar epoxy corrosion protection.
Front-profile 3D rendering of the 3-piece fuel tank kit for a Yellowfin 54, illustrating the mirrored wedge-style port and starboard saddle tanks and the tapered center tank profile for a precise factory-fit installation.
Overhead 3D rendering of the complete Yellowfin 54 OEM replacement fuel tank 3-tank combo kit, showing the full layout of center and saddle tanks with coal-tar epoxy finish and Welding World logo.
3D rendering of the starboard (STBD) saddle fuel tank for a Yellowfin 54 in unpainted mill-finish aluminum, showing the tapered wedge-hull profile and precise weld joints for OEM replacement.
3D rendering of the center fuel tank for a Yellowfin 54 in unpainted mill-finish aluminum, showing the primary dimensions, fuel pickups, sending unit locations, and clean welded seams.
Close-up detail of the fuel fill and vent assembly on a Yellowfin 54 OEM replacement fuel tank, showing the precision-machined fill neck, vent fitting, and coal-tar epoxy coated surfaces.
Detailed close-up 3D rendering of the fuel fill and vent assembly for a Yellowfin 54 replacement fuel tank kit, showcasing the precision-machined fittings and heavy-duty coal-tar epoxy coating.
YellowFin 54 Fuel Tank (3-tank combo) | OEM Replacement
YellowFin 54 Fuel Tank (3-tank combo) | OEM Replacement
YellowFin 54 Fuel Tank (3-tank combo) | OEM Replacement
Rear-perspective 3D rendering of the complete 3-piece fuel tank replacement kit for a Yellowfin 54, showcasing the center tank and two saddle tanks with a protective coal-tar epoxy finish.
Detail 3D rendering of the starboard saddle fuel tank for a Yellowfin 54, highlighting the unpainted mill-finish aluminum surface, fuel pickup ports, and inspection plate locations.
Detail rendering of the Yellowfin 54 fuel tank 3-tank combo OEM replacement kit, showcasing weld quality, hardware placement, and the corrosion-resistant coal-tar epoxy finish across all three tanks.
Alternative overhead 3D rendering of the Yellowfin 54 fuel tank 3-tank combo kit, displaying the center and saddle tank arrangement with precision rigging hardware and corrosion-resistant coating.
Dimensional diagram for the center fuel tank of a Yellowfin 54 OEM replacement 3-tank combo, showing primary measurements rendered in mill-finish aluminum with the Welding World logo.
Dimensional diagram for the PORT saddle fuel tank of a Yellowfin 54 OEM replacement 3-tank combo, featuring precise measurements with a tapered wedge-hull profile rendered in mill-finish aluminum.
Dimensional diagram for the starboard (STBD) saddle fuel tank of a Yellowfin 54 OEM replacement 3-tank combo, showing engineering measurements with a tapered wedge profile rendered in mill-finish aluminum.
Dimensional diagram for the PORT saddle fuel tank of a Yellowfin 54 OEM replacement 3-tank combo, featuring precise measurements with a tapered wedge-hull profile rendered in mill-finish aluminum.
Dimensional diagram for the starboard (STBD) saddle fuel tank of a Yellowfin 54 OEM replacement 3-tank combo, showing engineering measurements with a tapered wedge profile rendered in mill-finish aluminum.
Detailed close-up 3D rendering of the rigging hardware on a Yellowfin 54 3-piece fuel tank kit, featuring premium fuel pickups, sending units, and inspection plates on coal-tar epoxy finished center and saddle tanks.
Detailed close-up 3D rendering of the fuel fill and vent assembly for a Yellowfin 54 replacement fuel tank kit, showcasing the precision-machined fittings and heavy-duty coal-tar epoxy coating.
High-angle 3D rendering of the 3-piece OEM replacement fuel tank kit for a Yellowfin 54, featuring the center tank and two saddle tanks with pre-installed rigging hardware and a coal-tar epoxy finish.
Low-angle wide-perspective 3D rendering of the center tank and twin saddle tanks for a Yellowfin 54, showcasing the hull-matching tapered profiles and coal-tar epoxy corrosion protection.
Front-profile 3D rendering of the 3-piece fuel tank kit for a Yellowfin 54, illustrating the mirrored wedge-style port and starboard saddle tanks and the tapered center tank profile for a precise factory-fit installation.
Overhead 3D rendering of the complete Yellowfin 54 OEM replacement fuel tank 3-tank combo kit, showing the full layout of center and saddle tanks with coal-tar epoxy finish and Welding World logo.
3D rendering of the starboard (STBD) saddle fuel tank for a Yellowfin 54 in unpainted mill-finish aluminum, showing the tapered wedge-hull profile and precise weld joints for OEM replacement.
3D rendering of the center fuel tank for a Yellowfin 54 in unpainted mill-finish aluminum, showing the primary dimensions, fuel pickups, sending unit locations, and clean welded seams.
Close-up detail of the fuel fill and vent assembly on a Yellowfin 54 OEM replacement fuel tank, showing the precision-machined fill neck, vent fitting, and coal-tar epoxy coated surfaces.

YellowFin 54 Fuel Tank (3-tank combo) | OEM Replacement

$ 7,800.00
/
  • Local pickup available
  • Over-sized & over-weight item.
  • Only Ships LTL Freight.
  • Call us Mon.-Fri. 8:30 a.m. to 4:40 p.m. if in any doubt.

Upgrade your offshore power with this high-capacity Yellowfin 54 (3-tank combo) OEM replacement system. Precision-engineered to mirror the original factory configuration, this set features heavy-duty .190" and .250" marine-grade 5052-H32 aluminum construction for maximum structural integrity in demanding sea conditions. Each tank in the trio is professionally TIG welded, individually pressure-tested, and finished with a rugged black TarGard epoxy coating to ensure total corrosion resistance. Designed for a guaranteed 100% drop-in fit, this complete system comes fully equipped with integrated fuel sending units and premium 316 stainless steel fittings, providing a turn-key solution to restore the long-range reliability of your Yellowfin flagship.

 

  • Guaranteed to Fit Your Yellow 
    Every tank is engineered using OEM drawings and/or reverse-engineered from an original unit to ensure a precise, 100% guaranteed fit.  

 

  • Fully Certified Manufacturing
    Our tanks are built by an NMMA-type certified manufacturer and produced in accordance with all ABYC standards.

 

  • USCG Compliant & Pressure Tested
    Each tank meets all USCG requirements and is individually pressure-tested in house. All federal regulations are followed throughout our manufacturing process to ensure maximum safety and reliability.

 

  • .190-Thickness 5052 H32 Aluminum Construction
    Built from premium marine-grade 5052 H32 aluminum at .190 thickness for exceptional strength and long-term durability.

 

  • .250-Thickness 5052 H32 Aluminum Construction
    Built from premium marine-grade 5052 H32 aluminum at .250 thickness for exceptional strength and long-term durability.

 

  • Complete, Ready-to-Install System
    Each tank comes fully equipped with all required components, including the sender, fittings, and hardware.

 

  • Precision Hand-Welded Construction
    Every tank is hand-crafted using GTAW (TIG) welding, exceeding ASME and AWS D3.7:2004 standards for marine aluminum fabrication.                                                   

 

  • Sherwin-Williams® TarGard® Epoxy Coating
    Finished with Sherwin-Williams® TarGard® Epoxy to provide added protection against corrosion and harsh marine environments, extending the overall life of the tank.

 

  • KUS® (formerly WEMA USA®) Reed-Switch Fuel Level Sender
    Features a high-quality KUS® reed-switch sender with an NBR float, providing accurate and reliable fuel-level measurement.

 

Buy with confidence. Shortly after your payment clears you'll be sent via e-mail a complete set of detailed drawings for you to check all dimensions and fittings positions. If there's any difference from your old tank we can make any reasonable modifications to accommodate your needs. Fabrication of your new tank won't start until you send us your specs confirmation.  

 

IMPORTANT NOTE: The base price is for local pickup in our SW Miami Shop. Check options above for crating and shipping to the contiguous 48 States. All tanks are made to order and the fabrication lead time is 1-2 work weeks. The finished tank pickup window is also 1-2 work weeks, so make sure you will be able to take delivery of your finished tank within that timeframe.     

 

NOTE: Check your tank dimensions thoroughly! Once a tank is manufactured and/or shipped we can't be responsible for mismatches and refunds or returns won't be accepted. All sales are final!

 

Shipping: Only freight to the 48 contiguous states. Contact us for extra-cost shipping options for HI and AK. Orders for international shipping from US-based carriers are welcome but contact us first to coordinate details.

 

Return Policy: No refunds are accepted, as all of our products are made to order. Our policy is strictly limited to the repair or replacement of qualifying defective or damaged goods. Please note that shipping costs are non-refundable. 

 

Fabrication lead time (before shipping): 1-2 work weeks. 

Due to this item's size and weight we can only ship it in an economical way via Less Than Truckload (LTL) consolidated land shipping, and only to the contiguous 48 States.

For shipping inquiries to AK, HI, PR, US-VI, and international shipping, please contact us first at sales@weldingworldinc.com.

All of the destinations above we can only serve as a Free Carrier (or FCA) modality, that requires the customer to contract and pay for their carrier service of choice. We can still ship the item, but only to a warehouse/receiving office within the 48-contiguous States.

In plain terms what this means is that if you want to ship your product to any non-contiguous US territory or internationally, you, the customer, has to provide us with the warehouse address of the carrier that serves your locality with an address within the contiguous 48-US States, as we do not ship overseas on our own.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like

Recently viewed