A black boat fuel tank with a textured coating and a shallow V-shape cut into its front bottom edge, viewed from a high three-quarter angle against a checkered background. Four L-shaped mounting tabs are welded to the top edges. Various fittings are spaced along the top surface, including a brass fitting at the front corner, a central fuel sending unit with a label, and a fuel fill assembly at the far end
A 3D schematic of the replacement fuel tank for a 1999 Edgewater 18.5 CC, shown against a black background. Text on the image identifies it as a 53-gallon net capacity tank. Dimension lines detail its measurements as 48 ¼ inches long by 25 ¾ inches wide, with a main body height of 12 ¼ inches and a total height of 14 ½ inches at the V-shaped front. The silver-colored schematic displays several fittings on its top surface. The 'WW' anchor logo for Welding World is in the bottom right corner
A rectangular boat fuel tank with a heavy, textured black coating, viewed from a high three-quarter angle against a checkered background. Four L-shaped mounting tabs are welded to the top corners. Various fittings are spaced along the top surface, including a brass fitting in the foreground, a central fuel sending unit with a label, and a fuel fill assembly at the far end
A boat fuel tank with a heavy, textured black coating and angled front bottom corners, viewed from a high, rear three-quarter angle against a checkered background. Four flat mounting tabs are welded to the top edges. A series of fittings are spaced along the top surface, including a brass fitting at the rear, a central fuel sending unit with a label, and a fuel fill assembly with a curved white pipe at the front
A side profile view of a long, rectangular boat fuel tank with a heavy, textured black coating, set against a checkered background. The bottom of the tank has a slight V-shape to match a boat's hull. Four black mounting tabs are attached to the top edge, and various fittings, including a brass fitting, a central fuel sending unit, and a fuel fill assembly with a white pipe, are spaced along the top surface
A close-up view of a manufacturer's label and a round fuel sending unit on a heavily textured black surface. On the left, the white "Welding World, Inc." label specifies the tank is for an "Edgewater 18.5" Center Console" with a 54-gallon capacity, made on September 19, 2022. On the right, the silver fuel sending unit is secured with four screws, with a black wire emerging from its center. The label also features ABYC and NMMA compliance logos
A black boat fuel tank with a textured coating and a shallow V-shape cut into its front bottom edge, viewed from a high three-quarter angle against a checkered background. Four L-shaped mounting tabs are welded to the top edges. Various fittings are spaced along the top surface, including a brass fitting at the front corner, a central fuel sending unit with a label, and a fuel fill assembly at the far end
A 3D schematic of the replacement fuel tank for a 1999 Edgewater 18.5 CC, shown against a black background. Text on the image identifies it as a 53-gallon net capacity tank. Dimension lines detail its measurements as 48 ¼ inches long by 25 ¾ inches wide, with a main body height of 12 ¼ inches and a total height of 14 ½ inches at the V-shaped front. The silver-colored schematic displays several fittings on its top surface. The 'WW' anchor logo for Welding World is in the bottom right corner
A rectangular boat fuel tank with a heavy, textured black coating, viewed from a high three-quarter angle against a checkered background. Four L-shaped mounting tabs are welded to the top corners. Various fittings are spaced along the top surface, including a brass fitting in the foreground, a central fuel sending unit with a label, and a fuel fill assembly at the far end
A boat fuel tank with a heavy, textured black coating and angled front bottom corners, viewed from a high, rear three-quarter angle against a checkered background. Four flat mounting tabs are welded to the top edges. A series of fittings are spaced along the top surface, including a brass fitting at the rear, a central fuel sending unit with a label, and a fuel fill assembly with a curved white pipe at the front
A side profile view of a long, rectangular boat fuel tank with a heavy, textured black coating, set against a checkered background. The bottom of the tank has a slight V-shape to match a boat's hull. Four black mounting tabs are attached to the top edge, and various fittings, including a brass fitting, a central fuel sending unit, and a fuel fill assembly with a white pipe, are spaced along the top surface
A close-up view of a manufacturer's label and a round fuel sending unit on a heavily textured black surface. On the left, the white "Welding World, Inc." label specifies the tank is for an "Edgewater 18.5" Center Console" with a 54-gallon capacity, made on September 19, 2022. On the right, the silver fuel sending unit is secured with four screws, with a black wire emerging from its center. The label also features ABYC and NMMA compliance logos
A symmetrical, frontal view of a 3D schematic for a boat's belly fuel tank, set against a solid black background. The image highlights the tank's V-shaped bottom, designed to fit the deadrise of a hull. A series of fittings are aligned down the center of the wide, flat top surface, with a curved pipe prominent in the foreground

Edgewater 18.5 CC 1999 - 53 gal. Tanque de combustible de repuesto OEM neto

$ 1,200.00
/
Title
  • Local pickup available
  • Over-sized & over-weight item.
  • Only Ships LTL Freight.
  • Call us Mon.-Fri. 8:30 a.m. to 4:40 p.m. if in any doubt.
  • NOTA IMPORTANTE: El precio base es para retiro local en nuestra SW Miami Shop. Consulte las opciones de embalaje y envío a los 48 estados contiguos. Todos los tanques se fabrican por encargo y el plazo de fabricación es de 2 semanas laborales. La ventana de recolección del tanque terminado también es de 2 semanas laborales, así que asegúrese de que puede recibir su tanque terminado dentro de ese plazo.

    • Comprar con confianza. Poco después de que se acredite su pago, se le enviará por correo electrónico un conjunto completo de dibujos para que verifique todas las dimensiones y las posiciones de los accesorios. Si hay alguna diferencia con su antiguo tanque, o si necesita algunas modificaciones menores, podemos hacer los cambios razonables para satisfacer sus necesidades.

      • Construcción de aluminio serie Alcoa ® 5052 H32 de .190 de espesor.

        • Soldado GTAW (TIG) soldado a mano para superar los estándares ASME / ASW D3.7:2004.

          • Sherwin Williams® TarGard® Epoxi pintado para la mejor protección del medio ambiente marino.

              • Interruptor de láminas KUSA® (ex-WEMA USA) y transmisor de nivel de combustible de flotador NBR.

                NOTA: ¡Compruebe minuciosamente las dimensiones de su tanque! Una vez que se fabrica y / o envía un tanque, no podemos ser responsables de los desajustes y no se aceptarán reembolsos o devoluciones. ¡Todas las ventas son finales!

                Plazo de ejecución de la fabricación (antes del envío): 2 semanas laborales.

                Envío: Solo flete a los 48 estados contiguos. Comuníquese con nosotros para conocer las opciones de envío con costo adicional para HI y AK. Se aceptan envíos internacionales de transportistas con sede en EE. UU., pero contáctenos primero para coordinar los detalles.

                Due to this item's size and weight we can only ship it in an economical way via Less Than Truckload (LTL) consolidated land shipping, and only to the contiguous 48 States.

                For shipping inquiries to AK, HI, PR, US-VI, and international shipping, please contact us first at sales@weldingworldinc.com.

                All of the destinations above we can only serve as a Free Carrier (or FCA) modality, that requires the customer to contract and pay for their carrier service of choice. We can still ship the item, but only to a warehouse/receiving office within the 48-contiguous States.

                In plain terms what this means is that if you want to ship your product to any non-contiguous US territory or internationally, you, the customer, has to provide us with the warehouse address of the carrier that serves your locality with an address within the contiguous 48-US States, as we do not ship overseas on our own.

                Este sitio está protegido por hCaptcha y se aplican la Política de privacidad de hCaptcha y los Términos del servicio.

                You may also like

                Visto recientemente

                Volver a productos