A long, rectangular boat fuel tank with a black coating, viewed from a high three-quarter angle against a checkered background. The front bottom edge of the tank is angled in a V-shape to fit a boat's hull. A heavy-duty mounting bracket is centered on the front face, and smaller mounting tabs line the top edges. The top surface features a fuel sending unit with a white label near the front, and a separate fuel fitting at the far end
A 3D schematic of the replacement fuel tank for an Angler 2600 (2003 model), shown against a black background. Text on the image identifies it as a 187-gallon net capacity tank. Dimension lines detail its measurements as 81 inches long by 37 inches wide. The main body height is 16 ¼ inches, with the total height at the V-shaped front measuring 19 ¼ inches. The silver-colored schematic shows four mounting tabs, a V-shaped front bottom, and various fittings on top
A long, black boat fuel tank with a textured coating and a rounded front bottom edge, viewed from a high three-quarter angle against a checkered background. Two heavy-duty lifting eye bolts are welded to the top front corners, and multiple flat mounting tabs line the top edges of the tank. The top surface is equipped with a fuel sending unit assembly near the front and a separate fitting with a blue cap at the rear
A long, black boat fuel tank with a textured coating, seen in profile against a checkered background. The tank features a distinctive stepped bottom with a recessed channel running along its length. Four large, textured mounting tabs and lifting eye bolts are visible on the top surface, along with fuel fittings at either end
A long, rectangular boat fuel tank with a black textured coating, viewed from a high three-quarter angle. The front bottom edge of the tank is rounded to fit a boat's hull. A heavy-duty lifting eye bolt is welded to the top front corner, and multiple flat mounting tabs line the top edges. The top surface is equipped with a fuel sending unit assembly near the front and another fitting with a blue cap at the rear
A close-up of a white manufacturer's label on a black, textured fuel tank. To the left of the label is a round, silver fuel sending unit, and a large brass fitting is visible below it. The "Welding World, Inc." label identifies the product as an "Angler 2600 Fuel Tank" with a capacity of 188 gallons, manufactured on November 1, 2022. The label also displays ABYC and NMMA compliance logos above a safety warning

Pescador 22' 120 gal. Tanque de combustible de repuesto OEM

Precio habitual$ 2,600.00
/

  • Local pickup available
  • Over-sized & over-weight item.
  • Only Ships LTL Freight.
  • Call us Mon.-Fri. 8:30 a.m. to 4:40 p.m. if in any doubt.
  • NOTA IMPORTANTE: El precio base es para retiro local en nuestra SW Miami Shop. Consulte las opciones de embalaje y envío a los 48 estados contiguos. Todos los tanques se fabrican por encargo y el plazo de fabricación es de 2 semanas laborales. La ventana de recolección del tanque terminado también es de 2 semanas laborales, así que asegúrese de poder recibir su tanque terminado dentro de ese plazo.

  • 100% compatible con todos los botes de consola central Angler de 22 pies con capacidad de 120 galones, tanques de combustible en el vientre

    • Construcción de aluminio serie Alcoa ® 5052 H32 de .125 de espesor.

      • Soldado GTAW (TIG) soldado a mano para superar los estándares ASME / ASW D3.7:2004.

        • Sherwin Williams® TarGard® Epoxi pintado para la mejor protección del medio ambiente marino.

          • Interruptor de láminas KUS® (ex-WEMA USA) y transmisor de nivel de combustible de flotador NBR.

            NOTA: ¡Compruebe minuciosamente las dimensiones de su tanque! Una vez que se fabrica y / o envía un tanque, no podemos ser responsables de los desajustes y no se aceptarán reembolsos o devoluciones. ¡Todas las ventas son finales!

            Plazo de ejecución de la fabricación (antes del envío): 2 semanas laborales.

            Envío: Solo flete a los 48 estados contiguos. Contáctenos para conocer las opciones de envío con costo adicional para HI y AK. Se aceptan envíos internacionales de transportistas con sede en EE. UU., pero contáctenos primero para coordinar los detalles.

            Due to this item's size and weight we can only ship it in an economical way via Less Than Truckload (LTL) consolidated land shipping, and only to the contiguous 48 States.

            For shipping inquiries to AK, HI, PR, US-VI, and international shipping, please contact us first at sales@weldingworldinc.com.

            All of the destinations above we can only serve as a Free Carrier (or FCA) modality, that requires the customer to contract and pay for their carrier service of choice. We can still ship the item, but only to a warehouse/receiving office within the 48-contiguous States.

            In plain terms what this means is that if you want to ship your product to any non-contiguous US territory or internationally, you, the customer, has to provide us with the warehouse address of the carrier that serves your locality with an address within the contiguous 48-US States, as we do not ship overseas on our own.

            Este sitio está protegido por hCaptcha y se aplican la Política de privacidad de hCaptcha y los Términos del servicio.


            Visto recientemente