A large rectangular black fuel tank with a matte finish, shown from an angled perspective. The tank features six welded metal mounting brackets on its top edges and two metal lifting eyes on the sides. On the top surface, there is a small label with product information along with various fittings, including two brass fuel connectors, a black and blue capped vent, and a sensor or wiring connection. The tank has clean, sharp edges and a sturdy, industrial design
A white 3D model rendering of the Aquasport 275 2001 Fuel Tank with dimensions and features labeled. The tank is rectangular with slightly chamfered edges on one side and has multiple welded metal mounting brackets along the top edges. The dimensions are 53 1/4 inches in length, 35 1/2 inches in width, and 25 3/4 inches in height. On top of the tank are various fittings including brass fuel connectors, a black capped vent, and a sensor or wiring connection
A black rectangular fuel tank viewed from an angled top front perspective. The tank has a flat top surface with multiple welded mounting tabs around the edges and two circular lifting rings on each side near the top corners. Several fittings and connectors are attached near one end of the top surface, including a white and black pipe connector with a blue tip, brass fittings, a sensor or wiring connector, and a small white cap. The tank’s sides are smooth with visible weld seams along the edges
A black rectangular marine fuel tank viewed from the front angle with the narrow front face facing forward. The tank has a flat top surface with multiple welded mounting tabs along the edges. A single circular lifting ring is visible centered on the front narrow face. On the top surface, near the back, several fuel fittings and connectors are mounted, including a white plastic pipe with a blue tip, brass fittings, and a sensor with black wiring
A black rectangular marine fuel tank is shown from a front-left angle with the longer side facing forward. The tank has a flat top surface featuring several welded mounting brackets along the edges. Two circular lifting rings are visible, one on the left side edge and one near the back on the right. The top surface has various fittings and connectors, including a white plastic pipe with a blue tip, brass fittings, and a sensor with black wiring. The bottom edges of the tank are rounded
Label on a black metal fuel tank with Welding World Inc. logo and contact information. Part number WW316250, customer QB 2762. Manufactured for Aquasport 275 Fuel Tank, manufactured on 04/05/2023. Capacity 188 gallons, thickness 0.190 inches. Made from aluminum 5052-H-32. Serial number 2023259. Recommended for gasoline. Maximum test pressure 6 psi / 34.5 kpa, tested under 33 CFR § 183.510 (a). Meets ISO 8846 and 10088 specifications. Certification logos for ABYC and NMMA
A large rectangular black fuel tank with a matte finish, shown from an angled perspective. The tank features six welded metal mounting brackets on its top edges and two metal lifting eyes on the sides. On the top surface, there is a small label with product information along with various fittings, including two brass fuel connectors, a black and blue capped vent, and a sensor or wiring connection. The tank has clean, sharp edges and a sturdy, industrial design
A white 3D model rendering of the Aquasport 275 2001 Fuel Tank with dimensions and features labeled. The tank is rectangular with slightly chamfered edges on one side and has multiple welded metal mounting brackets along the top edges. The dimensions are 53 1/4 inches in length, 35 1/2 inches in width, and 25 3/4 inches in height. On top of the tank are various fittings including brass fuel connectors, a black capped vent, and a sensor or wiring connection
A black rectangular fuel tank viewed from an angled top front perspective. The tank has a flat top surface with multiple welded mounting tabs around the edges and two circular lifting rings on each side near the top corners. Several fittings and connectors are attached near one end of the top surface, including a white and black pipe connector with a blue tip, brass fittings, a sensor or wiring connector, and a small white cap. The tank’s sides are smooth with visible weld seams along the edges
A black rectangular marine fuel tank viewed from the front angle with the narrow front face facing forward. The tank has a flat top surface with multiple welded mounting tabs along the edges. A single circular lifting ring is visible centered on the front narrow face. On the top surface, near the back, several fuel fittings and connectors are mounted, including a white plastic pipe with a blue tip, brass fittings, and a sensor with black wiring
A black rectangular marine fuel tank is shown from a front-left angle with the longer side facing forward. The tank has a flat top surface featuring several welded mounting brackets along the edges. Two circular lifting rings are visible, one on the left side edge and one near the back on the right. The top surface has various fittings and connectors, including a white plastic pipe with a blue tip, brass fittings, and a sensor with black wiring. The bottom edges of the tank are rounded
Label on a black metal fuel tank with Welding World Inc. logo and contact information. Part number WW316250, customer QB 2762. Manufactured for Aquasport 275 Fuel Tank, manufactured on 04/05/2023. Capacity 188 gallons, thickness 0.190 inches. Made from aluminum 5052-H-32. Serial number 2023259. Recommended for gasoline. Maximum test pressure 6 psi / 34.5 kpa, tested under 33 CFR § 183.510 (a). Meets ISO 8846 and 10088 specifications. Certification logos for ABYC and NMMA
A 3D model rendering of a rectangular fuel tank shown from the front side. The tank is light gray in color with a smooth surface and has a slightly tapered bottom edge that narrows to a flat angled base. Along the top edges of the tank are multiple welded mounting brackets extending upward. The tank features various fittings and components on the top surface, including two pipe connectors, a sensor or wiring connector, and a circular lifting eye ring centered near the front edge.

Aquasport 25' 2002 - Tanque de combustible de 143 galones

$ 2,694.00
/
  • Local pickup available
  • Over-sized & over-weight item.
  • Only Ships LTL Freight.
  • Call us Mon.-Fri. 8:30 a.m. to 4:40 p.m. if in any doubt.
  • NOTA IMPORTANTE: El precio base es para retiro local en nuestra SW Miami Shop. Consulte las opciones de embalaje y envío a los 48 estados contiguos. Todos los tanques se fabrican por encargo y el plazo de fabricación es de 2 semanas laborales. La ventana de recolección del tanque terminado también es de 2 semanas laborales, así que asegúrese de poder recibir su tanque terminado dentro de ese plazo.

  • 100% compatible con todos los botes de consola central Aquasport de 25' del año modelo 2002 con un tanque de combustible de 143 galones de capacidad en la parte inferior y posiblemente con otros botes modelo de año cercano.

    • .190 (combustible) y .125 (agua) de espesor Alcoa ® 5052 Serie H32 Construcción de aluminio.

      • Soldado GTAW (TIG) soldado a mano para superar los estándares ASME / ASW D3.7:2004.

        • Sherwin Williams® TarGard® Epoxi pintado para la mejor protección del medio ambiente marino.

            • Interruptor de láminas KUSA® (ex-WEMA USA) y transmisor de nivel de combustible de flotador NBR.

              NOTA: ¡Compruebe minuciosamente las dimensiones de su tanque! Una vez que se fabrica y / o envía un tanque, no podemos ser responsables de los desajustes y no se aceptarán reembolsos o devoluciones. ¡Todas las ventas son finales!

              Plazo de ejecución de la fabricación (antes del envío): 2 semanas laborales.

              Envío: Solo flete a los 48 estados contiguos. Contáctenos para conocer las opciones de envío con costo adicional para HI y AK. Se aceptan envíos internacionales de transportistas con sede en EE. UU., pero contáctenos primero para coordinar los detalles.

              Due to this item's size and weight we can only ship it in an economical way via Less Than Truckload (LTL) consolidated land shipping, and only to the contiguous 48 States.

              For shipping inquiries to AK, HI, PR, US-VI, and international shipping, please contact us first at sales@weldingworldinc.com.

              All of the destinations above we can only serve as a Free Carrier (or FCA) modality, that requires the customer to contract and pay for their carrier service of choice. We can still ship the item, but only to a warehouse/receiving office within the 48-contiguous States.

              In plain terms what this means is that if you want to ship your product to any non-contiguous US territory or internationally, you, the customer, has to provide us with the warehouse address of the carrier that serves your locality with an address within the contiguous 48-US States, as we do not ship overseas on our own.

              Este sitio está protegido por hCaptcha y se aplican la Política de privacidad de hCaptcha y los Términos del servicio.

              You may also like

              Visto recientemente