117-gallon gross capacity belly fuel tank for the 1995 Boston Whaler Outrage 21'. The matte black aluminum tank features a rectangular profile with a capped blue-handled shutoff valve positioned near the front edge, a central cylindrical sender unit with attached wiring, and a rear-mounted brass return fitting. A white certification label confirms .190″ 5052-H32 marine-grade aluminum construction and 9 psi test rating under 33 CFR § 183.510(a)
Schematic drawing of a 117-gallon gross capacity aluminum belly fuel tank tailored for the 1995 Boston Whaler Outrage 21' center console. The tank is dimensioned at 118.25″ (L) × 24″ (W) × 11″ (H) and shown in a 3D perspective view with clearly marked fittings and top-mounted hardware. Its streamlined rectangular profile is suited for underdeck installation, aiding weight balance and OEM-cavity fit. A “Whaler Wear” logo in the bottom right corner affirms the tank’s design origin and authenticity
117-gallon gross capacity aluminum belly fuel tank designed for the 1995 Boston Whaler Outrage 21' center console. The tank features a matte black finish with a flat top surface, front-positioned blue-handled capped shutoff valve, a centrally mounted cylindrical sensor unit with attached wiring, and a rear-mounted dual brass return fitting. A white compliance label confirms .190″ 5052-H32 marine-grade aluminum construction, 9 psi test pressure rating under 33 CFR § 183.510(a), and adherence to ABYC and NMMA
117-gallon gross capacity aluminum belly fuel tank designed for the 1995 Boston Whaler Outrage 21' center console. The tank is rendered with a matte black finish, rectangular layout, and isolated transparent background for visual clarity. Key top-side components include a capped blue-handled shutoff valve near the forward edge, a centrally mounted cylindrical sensor unit with black harness wiring, and a rear dual brass return fitting. The layout supports factory-aligned underdeck installation
Detail view of the top-mounted components on a 117-gallon belly fuel tank for the 1995 Boston Whaler Outrage 21'. The image shows dual hex-head bolts embedded in a glossy black sealed surface, possibly indicating bonding or corrosion-resistant treatment. One bolt includes an attached brass or plated fitting, likely part of the fuel return or grounding path. The surrounding surface shows uneven application of the sealant, reinforcing its use in moisture resistance or dielectric isolation
Certification label for the 117-gallon aluminum belly fuel tank installed in the 1995 Boston Whaler Outrage 21' center console. Issued by Welding World Inc. (Part #WW-T-250, Serial #2022036), the label confirms .190″ 5052-H32 marine-grade aluminum construction and gasoline compatibility. It specifies a 9 psi maximum test pressure in accordance with 33 CFR § 183.510(a), and cites compliance with ISO 8846 and ISO 10088 standards. Additional markings note ABYC and NMMA certifications. A printed warning stresse
117-gallon gross capacity belly fuel tank for the 1995 Boston Whaler Outrage 21'. The matte black aluminum tank features a rectangular profile with a capped blue-handled shutoff valve positioned near the front edge, a central cylindrical sender unit with attached wiring, and a rear-mounted brass return fitting. A white certification label confirms .190″ 5052-H32 marine-grade aluminum construction and 9 psi test rating under 33 CFR § 183.510(a)
Schematic drawing of a 117-gallon gross capacity aluminum belly fuel tank tailored for the 1995 Boston Whaler Outrage 21' center console. The tank is dimensioned at 118.25″ (L) × 24″ (W) × 11″ (H) and shown in a 3D perspective view with clearly marked fittings and top-mounted hardware. Its streamlined rectangular profile is suited for underdeck installation, aiding weight balance and OEM-cavity fit. A “Whaler Wear” logo in the bottom right corner affirms the tank’s design origin and authenticity
117-gallon gross capacity aluminum belly fuel tank designed for the 1995 Boston Whaler Outrage 21' center console. The tank features a matte black finish with a flat top surface, front-positioned blue-handled capped shutoff valve, a centrally mounted cylindrical sensor unit with attached wiring, and a rear-mounted dual brass return fitting. A white compliance label confirms .190″ 5052-H32 marine-grade aluminum construction, 9 psi test pressure rating under 33 CFR § 183.510(a), and adherence to ABYC and NMMA
117-gallon gross capacity aluminum belly fuel tank designed for the 1995 Boston Whaler Outrage 21' center console. The tank is rendered with a matte black finish, rectangular layout, and isolated transparent background for visual clarity. Key top-side components include a capped blue-handled shutoff valve near the forward edge, a centrally mounted cylindrical sensor unit with black harness wiring, and a rear dual brass return fitting. The layout supports factory-aligned underdeck installation
Detail view of the top-mounted components on a 117-gallon belly fuel tank for the 1995 Boston Whaler Outrage 21'. The image shows dual hex-head bolts embedded in a glossy black sealed surface, possibly indicating bonding or corrosion-resistant treatment. One bolt includes an attached brass or plated fitting, likely part of the fuel return or grounding path. The surrounding surface shows uneven application of the sealant, reinforcing its use in moisture resistance or dielectric isolation
Certification label for the 117-gallon aluminum belly fuel tank installed in the 1995 Boston Whaler Outrage 21' center console. Issued by Welding World Inc. (Part #WW-T-250, Serial #2022036), the label confirms .190″ 5052-H32 marine-grade aluminum construction and gasoline compatibility. It specifies a 9 psi maximum test pressure in accordance with 33 CFR § 183.510(a), and cites compliance with ISO 8846 and ISO 10088 standards. Additional markings note ABYC and NMMA certifications. A printed warning stresse
Rendered model of a 117-gallon aluminum belly fuel tank designed for the 1995 Boston Whaler Outrage 21' center console. The white tank features a rectangular layout with distinct top-mounted hardware: two small cylindrical fittings toward the rear, a central circular component, and a front-mounted funnel-shaped fitting with a rectangular base. The clean, black background emphasizes form and proportions for use in CAD validation, installation planning, and OEM cavity fitting

Boston Whaler Indignación 21' 1995 - 117 gal. Tanque de combustible bruto de repuesto OEM

$ 2,200.00
/
  • Local pickup available
  • Over-sized & over-weight item.
  • Only Ships LTL Freight.
  • Call us Mon.-Fri. 8:30 a.m. to 4:40 p.m. if in any doubt.
  • NOTA IMPORTANTE: El precio base es para retiro local en nuestra SW Miami Shop. Consulte las opciones de embalaje y envío a los 48 estados contiguos. Todos los tanques se fabrican por encargo y el plazo de fabricación es de 2 semanas laborales. La ventana de recolección del tanque terminado también es de 2 semanas laborales, así que asegúrese de poder recibir su tanque terminado dentro de ese plazo.

  • Comprar con confianza. Poco después de que se acredite su pago, se le enviará por correo electrónico un conjunto completo de dibujos para que verifique todas las dimensiones y las posiciones de los accesorios. Si hay alguna diferencia con su antiguo tanque, podemos hacer cualquier modificación razonable para satisfacer sus necesidades.

    • Construcción de aluminio serie Alcoa ® 5052 H32 de .190 de espesor.

      • Soldado GTAW (TIG) soldado a mano para superar los estándares ASME / ASW D3.7:2004.

        • Sherwin Williams® TarGard® Epoxi pintado para la mejor protección del medio ambiente marino.

          • Interruptor de láminas KUSA® (ex-WEMA USA) y transmisor de nivel de combustible de flotador NBR.

          • 100 % CAD con ingeniería inversa según las especificaciones OEM. Exactamente dimensionado para el original pero superior en rendimiento, hardware, durabilidad y artesanía. Este es un reemplazo que en muchos aspectos es más una actualización.

          NOTA: ¡Compruebe minuciosamente las dimensiones de su tanque! Una vez que se fabrica y / o envía un tanque, no podemos ser responsables de los desajustes y no se aceptarán reembolsos o devoluciones. ¡Todas las ventas son finales!

          Plazo de ejecución de la fabricación (antes del envío): 2 semanas laborales.

          Envío: Solo flete a los 48 estados contiguos. Contáctenos para conocer las opciones de envío con costo adicional para HI y AK. Se aceptan envíos internacionales de transportistas con sede en EE. UU., pero contáctenos primero para coordinar los detalles.

          Due to this item's size and weight we can only ship it in an economical way via Less Than Truckload (LTL) consolidated land shipping, and only to the contiguous 48 States.

          For shipping inquiries to AK, HI, PR, US-VI, and international shipping, please contact us first at sales@weldingworldinc.com.

          All of the destinations above we can only serve as a Free Carrier (or FCA) modality, that requires the customer to contract and pay for their carrier service of choice. We can still ship the item, but only to a warehouse/receiving office within the 48-contiguous States.

          In plain terms what this means is that if you want to ship your product to any non-contiguous US territory or internationally, you, the customer, has to provide us with the warehouse address of the carrier that serves your locality with an address within the contiguous 48-US States, as we do not ship overseas on our own.

          Este sitio está protegido por hCaptcha y se aplican la Política de privacidad de hCaptcha y los Términos del servicio.

          You may also like

          Visto recientemente