A long, rectangular boat fuel tank with a black coating, viewed from a high, three-quarter profile angle against a checkered background. Multiple L-shaped mounting tabs are welded along the top edges. The top surface features a fuel sending unit with a valve handle and a label at the near end, and a separate, smaller fitting with a yellow cap at the far end
A 3D schematic of the replacement fuel tank for a 1995 Fountain 30, shown against a black background. Text on the image identifies the tank as having a 218-gallon net capacity. Dimension lines detail the long, rectangular tank's measurements as 119 ½ inches long, 37 ¾ inches wide, and 12 ¾ inches high. The silver-colored schematic displays several fittings along its top surface. The 'WW' anchor logo for Welding World is in the bottom right corner
A long, rectangular boat fuel tank with a black coating, featuring a large step-down notch in its side. The tank is viewed from a high, three-quarter profile angle against a checkered background. Multiple L-shaped mounting tabs are welded to the top edges. A small brass fitting with a blue tip is located on the near corner, while a fuel sending unit and a label are visible at the far end
A high-angle view looking down the entire length of a very long, rectangular boat fuel tank with a black, semi-gloss coating. Numerous L-shaped mounting tabs line both top edges of the tank. A single cluster of fittings, including a fuel sending unit and two brass connectors, is located on the top surface at the near end. The tank is set against a checkered background
A high, three-quarter profile view of a very long, rectangular boat fuel tank with a black, semi-gloss coating, set against a checkered background. Numerous L-shaped mounting tabs are welded along the top edges. Two distinct clusters of fittings are located at opposite ends of the top surface: one features a fuel sending unit with a valve, while the other contains two brass fittings and a label
A close-up of a white manufacturer's label on a heavily textured black surface, surrounded by fittings. To the right of the label is a round, silver fuel sending unit, and a brass right-angle fitting is visible above. The "Welding World, Inc." label specifies the tank is for a "Fountain 30' 1995 Fuel Tank" with a 225-gallon capacity, made on September 12, 2022, and features ABYC and NMMA compliance logos

Fuente 30 1995 - 218 gal. Tanque de combustible de repuesto OEM neto

Precio habitual$ 3,199.00
/

  • Local pickup available
  • Over-sized & over-weight item.
  • Only Ships LTL Freight.
  • Call us Mon.-Fri. 8:30 a.m. to 4:40 p.m. if in any doubt.
  • NOTA IMPORTANTE: El precio base es para retiro local en nuestra SW Miami Shop. Consulte las opciones de embalaje y envío a los 48 estados contiguos. Todos los tanques se fabrican por encargo y el plazo de fabricación es de 2 semanas laborales. La ventana de recolección del tanque terminado también es de 2 semanas laborales, así que asegúrese de que puede recibir su tanque terminado dentro de ese plazo.

    • Comprar con confianza. Poco después de que se acredite su pago, se le enviará por correo electrónico un conjunto completo de dibujos para que verifique todas las dimensiones y las posiciones de los accesorios. Si hay alguna diferencia con su antiguo tanque, o si necesita algunas modificaciones menores, podemos hacer los cambios razonables para satisfacer sus necesidades.

      • Construcción de aluminio serie Alcoa ® 5052 H32 de .190 de espesor.

        • Soldado GTAW (TIG) soldado a mano para superar los estándares ASME / ASW D3.7:2004.

          • Sherwin Williams® TarGard® Epoxi pintado para la mejor protección del medio ambiente marino.

              • Interruptor de láminas KUSA® (ex-WEMA USA) y transmisor de nivel de combustible de flotador NBR.

                NOTA: ¡Compruebe minuciosamente las dimensiones de su tanque! Una vez que se fabrica y / o envía un tanque, no podemos ser responsables de los desajustes y no se aceptarán reembolsos o devoluciones. ¡Todas las ventas son finales!

                Plazo de ejecución de la fabricación (antes del envío): 2 semanas laborales.

                Envío: Solo flete a los 48 estados contiguos. Comuníquese con nosotros para conocer las opciones de envío con costo adicional para HI y AK. Se aceptan envíos internacionales de transportistas con sede en EE. UU., pero contáctenos primero para coordinar los detalles.

                Due to this item's size and weight we can only ship it in an economical way via Less Than Truckload (LTL) consolidated land shipping, and only to the contiguous 48 States.

                For shipping inquiries to AK, HI, PR, US-VI, and international shipping, please contact us first at sales@weldingworldinc.com.

                All of the destinations above we can only serve as a Free Carrier (or FCA) modality, that requires the customer to contract and pay for their carrier service of choice. We can still ship the item, but only to a warehouse/receiving office within the 48-contiguous States.

                In plain terms what this means is that if you want to ship your product to any non-contiguous US territory or internationally, you, the customer, has to provide us with the warehouse address of the carrier that serves your locality with an address within the contiguous 48-US States, as we do not ship overseas on our own.

                Este sitio está protegido por hCaptcha y se aplican la Política de privacidad de hCaptcha y los Términos del servicio.


                Visto recientemente