A long, rectangular, black-coated marine fuel tank is shown from a three-quarter angle against a checkered, non-descript background. This belly-style tank, designed as an OEM replacement for a Mako 261B boat, features multiple welded mounting tabs along its top edges for installation. A fuel sending unit with a visible wire is mounted on the top surface in the front corner, with another fitting visible toward the rear of the tank.
A 3D schematic of a Mako 261B 1993 replacement fuel tank, detailing its dimensions against a plain black background. Text on the image specifies a "192 gallons net" capacity, and dimension lines indicate the tank measures 105 inches long, 30 ¼ inches wide, and 17 inches high. The silver-colored, aluminum-finish tank features a curved front bottom edge, multiple mounting tabs along the top sides, and several fittings on its top surface
A long, rectangular boat fuel tank with a black protective coating, viewed from a high three-quarter angle. The belly-style tank has an angled front bottom edge, multiple smaller mounting tabs along the top sides, and a larger, heavy-duty mounting bracket on the front corner. A fuel hose fitting with a blue cap is visible on the top surface near the front, while a fuel pickup and sending unit assembly is located further back. The tank is presented on a checkered black and grey background
A frontal view of a black boat fuel tank with a textured, protective coating, set against a checkered background. The camera looks down slightly, highlighting a heavy-duty mounting bracket with a circular hole centered on the front face. Directly behind the bracket, on the tank's top surface, is a fuel sending unit assembly with two fittings, a wire, and a white label. The angled, V-shaped bottom of the belly tank is clearly visible from this perspective
A full-length, three-quarter profile view of a long, rectangular boat fuel tank with a black protective coating. A series of flat mounting tabs lines the entire top edge of the tank's side, and its angled, V-shaped bottom is visible along its full length. The front of the tank in the foreground shows a heavy-duty mounting bracket and fuel sending unit, while another fuel fitting can be seen at the far end. The entire tank is displayed against a checkered black and grey background
A close-up photograph of a white manufacturer's label on a black fuel tank. The label is for "Welding World, Inc." and details the specifications for a "Mako 261B Fuel Tank." Key information listed includes a 192-gallon capacity, an aluminum material type, a manufacturing date of 11/28/2022, and a serial number. The label also displays compliance logos for ABYC and NMMA, pressure testing data, and a safety warning at the bottom. The edge of a fuel fitting and a wire are visible in the upper left corner.
A long, rectangular, black-coated marine fuel tank is shown from a three-quarter angle against a checkered, non-descript background. This belly-style tank, designed as an OEM replacement for a Mako 261B boat, features multiple welded mounting tabs along its top edges for installation. A fuel sending unit with a visible wire is mounted on the top surface in the front corner, with another fitting visible toward the rear of the tank.
A 3D schematic of a Mako 261B 1993 replacement fuel tank, detailing its dimensions against a plain black background. Text on the image specifies a "192 gallons net" capacity, and dimension lines indicate the tank measures 105 inches long, 30 ¼ inches wide, and 17 inches high. The silver-colored, aluminum-finish tank features a curved front bottom edge, multiple mounting tabs along the top sides, and several fittings on its top surface
A long, rectangular boat fuel tank with a black protective coating, viewed from a high three-quarter angle. The belly-style tank has an angled front bottom edge, multiple smaller mounting tabs along the top sides, and a larger, heavy-duty mounting bracket on the front corner. A fuel hose fitting with a blue cap is visible on the top surface near the front, while a fuel pickup and sending unit assembly is located further back. The tank is presented on a checkered black and grey background
A frontal view of a black boat fuel tank with a textured, protective coating, set against a checkered background. The camera looks down slightly, highlighting a heavy-duty mounting bracket with a circular hole centered on the front face. Directly behind the bracket, on the tank's top surface, is a fuel sending unit assembly with two fittings, a wire, and a white label. The angled, V-shaped bottom of the belly tank is clearly visible from this perspective
A full-length, three-quarter profile view of a long, rectangular boat fuel tank with a black protective coating. A series of flat mounting tabs lines the entire top edge of the tank's side, and its angled, V-shaped bottom is visible along its full length. The front of the tank in the foreground shows a heavy-duty mounting bracket and fuel sending unit, while another fuel fitting can be seen at the far end. The entire tank is displayed against a checkered black and grey background
A close-up photograph of a white manufacturer's label on a black fuel tank. The label is for "Welding World, Inc." and details the specifications for a "Mako 261B Fuel Tank." Key information listed includes a 192-gallon capacity, an aluminum material type, a manufacturing date of 11/28/2022, and a serial number. The label also displays compliance logos for ABYC and NMMA, pressure testing data, and a safety warning at the bottom. The edge of a fuel fitting and a wire are visible in the upper left corner.
Mako 261B 1993 with a 192-gallon fuel tank, providing extended range and reliability for marine exploration

Mako 261 1987 - (213 gal. bruto) Tanque de combustible de repuesto OEM

$ 2,700.00
/
  • Local pickup available
  • Over-sized & over-weight item.
  • Only Ships LTL Freight.
  • Call us Mon.-Fri. 8:30 a.m. to 4:40 p.m. if in any doubt.
  • NOTA IMPORTANTE: El precio base es para retiro local en nuestra SW Miami Shop. Consulte las opciones de embalaje y envío a los 48 estados contiguos. Todos los tanques se fabrican por encargo y el plazo de fabricación es de 2 semanas laborales. La ventana de recolección del tanque terminado también es de 2 semanas laborales, así que asegúrese de poder recibir su tanque terminado dentro de ese plazo.

  • Comprar con confianza. Poco después de que se acredite su pago, se le enviará por correo electrónico un conjunto completo de dibujos detallados para que verifique todas las dimensiones y las posiciones de los accesorios. Si hay alguna diferencia con su antiguo tanque, podemos hacer cualquier modificación razonable para satisfacer sus necesidades. La fabricación de su nuevo tanque no comenzará hasta que nos envíe su confirmación de especificaciones.

    • Construcción de aluminio serie Alcoa ® 5052 H32 de .190 de espesor.

      • Soldado GTAW (TIG) soldado a mano para superar los estándares ASME / ASW D3.7:2004.

        • Sherwin Williams® TarGard® Epoxi pintado para la mejor protección del medio ambiente marino.

          • Interruptor de láminas KUSA® (ex-WEMA USA) y transmisor de nivel de combustible de flotador NBR.

          • 100 % CAD con ingeniería inversa según las especificaciones OEM. Exactamente dimensionado para el original pero superior en rendimiento, hardware, durabilidad y artesanía. Este es un reemplazo que en muchos aspectos es más una actualización.

          NOTA: ¡Compruebe minuciosamente las dimensiones de su tanque! Una vez que se fabrica y / o envía un tanque, no podemos ser responsables de los desajustes y no se aceptarán reembolsos o devoluciones. ¡Todas las ventas son finales!

          Plazo de ejecución de la fabricación (antes del envío): 2 semanas laborales.

          Envío: Solo flete a los 48 estados contiguos. Contáctenos para conocer las opciones de envío con costo adicional para HI y AK. Se aceptan envíos internacionales de transportistas con sede en EE. UU., pero contáctenos primero para coordinar los detalles.

          Due to this item's size and weight we can only ship it in an economical way via Less Than Truckload (LTL) consolidated land shipping, and only to the contiguous 48 States.

          For shipping inquiries to AK, HI, PR, US-VI, and international shipping, please contact us first at sales@weldingworldinc.com.

          All of the destinations above we can only serve as a Free Carrier (or FCA) modality, that requires the customer to contract and pay for their carrier service of choice. We can still ship the item, but only to a warehouse/receiving office within the 48-contiguous States.

          In plain terms what this means is that if you want to ship your product to any non-contiguous US territory or internationally, you, the customer, has to provide us with the warehouse address of the carrier that serves your locality with an address within the contiguous 48-US States, as we do not ship overseas on our own.

          Este sitio está protegido por hCaptcha y se aplican la Política de privacidad de hCaptcha y los Términos del servicio.

          You may also like

          Visto recientemente

          Volver a nuevos productos