A matching pair of tall, narrow, black-coated saddle fuel tanks, presented as a port and starboard combo. The tanks are standing upright side-by-side against a checkered background, angled slightly to show they are a mirror-image set. Each tank features an identical arrangement of fittings on its top surface, including a fuel sending unit, several valve fittings, and a white manufacturer's label
A 3D schematic of a starboard-side saddle fuel tank for a 1993 Contender 31, shown against a black background. Text on the image identifies the tank as having an 85-gallon nominal capacity. Dimension lines detail the long, narrow, rectangular tank's measurements as 102 inches long, 16 inches wide, and 16 inches high. The silver-colored schematic displays several fittings on its top surface. The 'WW' anchor logo for Welding World is in the bottom right corner
A pair of tall, narrow, black-coated boat fuel tanks, presented as a port and starboard set. The tanks are standing upright and angled away from each other against a checkered background, emphasizing their height. They are mirror images, each with a textured finish and an identical arrangement of fuel fittings, valves, and a sending unit on their flat top surfacces
A very long and narrow rectangular boat fuel tank with a textured black coating, viewed from a high three-quarter angle that emphasizes its length. The tank is set against a checkered background. Its flat top surface is equipped with several fittings spaced along its length, including a corner brass fitting, a fuel sending unit with a label, an L-shaped valve, and a blue-tipped fitting at the far end
A long, narrow, rectangular boat fuel tank with a textured black finish, seen in a three-quarter profile view against a checkered background. A curved white vent pipe is prominent on the top near corner. At the far end of the tank's flat top surface, an L-shaped valve and a fuel sending unit with a wire are visible
A high-angle, end-on view looking down the entire length of a very long, narrow boat fuel tank, emphasizing its length. The tank has a textured black coating and is set against a checkered background. A series of fittings are aligned down the center of the flat top surface, including a brass corner fitting, a fuel sending unit with a label, an L-shaped valve, and a small blue-tipped fitting at the far end
A close-up view showing a white manufacturer's label positioned above a round, silver fuel sending unit on a heavily textured black surface. The "Welding World, Inc." label identifies the product as a "Contender 31' Saddle Fuel Tank" with an 85-gallon capacity, made on November 1, 2022. Below, the sending unit is recessed into the tank with a black wire emerging from its center. The label also displays ABYC and NMMA compliance logos
A matching pair of tall, narrow, black-coated saddle fuel tanks, presented as a port and starboard combo. The tanks are standing upright side-by-side against a checkered background, angled slightly to show they are a mirror-image set. Each tank features an identical arrangement of fittings on its top surface, including a fuel sending unit, several valve fittings, and a white manufacturer's label
A 3D schematic of a starboard-side saddle fuel tank for a 1993 Contender 31, shown against a black background. Text on the image identifies the tank as having an 85-gallon nominal capacity. Dimension lines detail the long, narrow, rectangular tank's measurements as 102 inches long, 16 inches wide, and 16 inches high. The silver-colored schematic displays several fittings on its top surface. The 'WW' anchor logo for Welding World is in the bottom right corner
A pair of tall, narrow, black-coated boat fuel tanks, presented as a port and starboard set. The tanks are standing upright and angled away from each other against a checkered background, emphasizing their height. They are mirror images, each with a textured finish and an identical arrangement of fuel fittings, valves, and a sending unit on their flat top surfacces
A very long and narrow rectangular boat fuel tank with a textured black coating, viewed from a high three-quarter angle that emphasizes its length. The tank is set against a checkered background. Its flat top surface is equipped with several fittings spaced along its length, including a corner brass fitting, a fuel sending unit with a label, an L-shaped valve, and a blue-tipped fitting at the far end
A long, narrow, rectangular boat fuel tank with a textured black finish, seen in a three-quarter profile view against a checkered background. A curved white vent pipe is prominent on the top near corner. At the far end of the tank's flat top surface, an L-shaped valve and a fuel sending unit with a wire are visible
A high-angle, end-on view looking down the entire length of a very long, narrow boat fuel tank, emphasizing its length. The tank has a textured black coating and is set against a checkered background. A series of fittings are aligned down the center of the flat top surface, including a brass corner fitting, a fuel sending unit with a label, an L-shaped valve, and a small blue-tipped fitting at the far end
A close-up view showing a white manufacturer's label positioned above a round, silver fuel sending unit on a heavily textured black surface. The "Welding World, Inc." label identifies the product as a "Contender 31' Saddle Fuel Tank" with an 85-gallon capacity, made on November 1, 2022. Below, the sending unit is recessed into the tank with a black wire emerging from its center. The label also displays ABYC and NMMA compliance logos
An end-on perspective view of a 3D schematic for a tall, narrow boat fuel tank against a black background. The light-grey, rectangular tank's long, flat top surface is shown with several rendered fittings, including a recessed U-shaped pipe at one end and an L-shaped pipe towards the middle

Pescador 204 - 1998 - 47 gal. Tanque de combustible de repuesto OEM

$ 2,700.00
/
  • Local pickup available
  • Over-sized & over-weight item.
  • Only Ships LTL Freight.
  • Call us Mon.-Fri. 8:30 a.m. to 4:40 p.m. if in any doubt.
  • NOTA IMPORTANTE: El precio base es para retiro local en nuestra SW Miami Shop. Consulte las opciones de embalaje y envío a los 48 estados contiguos. Todos los tanques se fabrican por encargo y el plazo de fabricación es de 2 semanas laborales. La ventana de recolección del tanque terminado también es de 2 semanas laborales, así que asegúrese de que puede recibir su tanque terminado dentro de ese plazo.

    • Comprar con confianza. Poco después de que se acredite su pago, se le enviará por correo electrónico un conjunto completo de dibujos para que verifique todas las dimensiones y las posiciones de los accesorios. Si hay alguna diferencia con su antiguo tanque, o si necesita algunas modificaciones menores, podemos hacer los cambios razonables para satisfacer sus necesidades.

      • Construcción de aluminio serie Alcoa ® 5052 H32 de .125 de espesor.

        • Soldado GTAW (TIG) soldado a mano para superar los estándares ASME / ASW D3.7:2004.

          • Sherwin Williams® TarGard® Epoxi pintado para la mejor protección del medio ambiente marino.

              • Interruptor de láminas KUSA® (ex-WEMA USA) y transmisor de nivel de combustible de flotador NBR.

                NOTA: ¡Compruebe minuciosamente las dimensiones de su tanque! Una vez que se fabrica y / o envía un tanque, no podemos ser responsables de los desajustes y no se aceptarán reembolsos o devoluciones. ¡Todas las ventas son finales!

                Plazo de ejecución de la fabricación (antes del envío): 2 semanas laborales.

                Envío: Solo flete a los 48 estados contiguos. Comuníquese con nosotros para conocer las opciones de envío con costo adicional para HI y AK. Se aceptan envíos internacionales de transportistas con sede en EE. UU., pero contáctenos primero para coordinar los detalles.

                Due to this item's size and weight we can only ship it in an economical way via Less Than Truckload (LTL) consolidated land shipping, and only to the contiguous 48 States.

                For shipping inquiries to AK, HI, PR, US-VI, and international shipping, please contact us first at sales@weldingworldinc.com.

                All of the destinations above we can only serve as a Free Carrier (or FCA) modality, that requires the customer to contract and pay for their carrier service of choice. We can still ship the item, but only to a warehouse/receiving office within the 48-contiguous States.

                In plain terms what this means is that if you want to ship your product to any non-contiguous US territory or internationally, you, the customer, has to provide us with the warehouse address of the carrier that serves your locality with an address within the contiguous 48-US States, as we do not ship overseas on our own.

                Este sitio está protegido por hCaptcha y se aplican la Política de privacidad de hCaptcha y los Términos del servicio.

                You may also like

                Visto recientemente